Rotaries are a popular point level indicator used for high-, mid- and low-level material detection in bins, tanks, and silos. Wired to a horn, alarm or light panel, rotaries send an alert when material reaches the desired level. BinMaster's...
BinMaster got its start in the early 1960's when a Nebraska-based seed company asked Garner Industries to design a device to detect when seed bins were full. Today, BinMaster is a leading manufacturer of sensors and software used to measure...
BinMaster's sensors and software are used by every industry that needs to measure inventory stored in bins, tanks, or silos. Anywhere there's a vessel to be measured, you'll find BinMaster. This product overview video will guide you...
Watch the AirSweep Guy demonstrate how large compressed air volume, delivered in little bursts, gives the AirSweep System power to get the toughest bulk materials flowing fast.
Dense Phase Pneumatic Conveying - The Basics
BinMaster's NCR-80 Non-Contact Radar is an 80 GHz continuous level sensor that measures the level of powders and solids...
Get to know the benefits of measuring and monitoring your inventory with the BinMaster 3DLevelScanner - the only sensor that...
BinMaster’s MVL multiple-scanner system significantly increases inventory accuracy in very large bins, tanks and silos. The system takes data from multiple 3DLevelScanners to cover a very wide surface area and calculate inventory volume with a...
BinMaster's Flow Detect 2000 is a flow / no flow sensor used to detect the flow of powders and bulk solids in your processing. It can be used as a preventive control to comply with FSMA.
BinMaster's BM-TSM Tilt Switch is a patented, mercury-free tilt switch used for high level detection of powders and bulk solids contained in bins, tanks, or silos.