Powder/Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Wireless Systems Save on Level Sensor Installation

October 23, 2019
BinMaster wireless systems save on level sensor installation.
BinMaster wireless systems save on level sensor installation.

BinMaster’s wireless communication solutions reduce the cost and complexity of installing silo inventory management systems.

Easily programmable, compact devices replace wires with over-the-air technology. A simple point-to-point configuration eliminates the hassle and cost of running wires. Point-to-multipoint systems are easily scaled for more complex deployments using additional wireless units, base stations, and wireless repeaters. Either setup can transmit up to a mile line-of-sight outdoors or 500 ft indoors.

For easy point-to-point communication, the WR-30-TR wireless bridge uses two weather-proof units to transmit analog, Modbus, or discrete data over the air. For more complex applications, a custom point-to-multipoint system can be built using two or more WR-90-TR units in conjunction with a base station. Each base station accommodates up to 16 dual input/output expansion cards to transmit analog, digital, or Modbus signals to a maximum of 32 WR-90-TR field units. Base stations are tailored using four types of modular input/output cards with your choice of dual analog inputs, dual analog outputs, digital I/O, or dual relays. 

Add the WR-30-RP wireless signal repeater to either a point-to-point or point-to multipoint system to retransmit wireless signals when connectivity is an issue. Repeaters are used to reroute signals around permanent obstacles or to transmit signals over distances exceeding one mile. Used with either the WR-30-TR or WR-90-TR, they are easy to install, requiring only power and a network ID. Any wireless bridge in range of the repeater with the same network ID will retransmit through it, increasing signal strength. 

These wireless systems are compatible with BinMaster’s non-contact radar, guided wave radar, and laser level sensors. They can be sued to get data to a PLC in your control room or to BinView or Binventory software for inventory access on your phone, tablet, or PC.  

BinMaster/Garner Industries, Lincoln, NE 402-434-9125 www.binmaster.com

More Articles That May Interest You:

 
 
 
 
BinMaster