Sign up for the Powder & Bulk Solids Weekly newsletter.
Mechanical Splices and Fasteners
October 30, 2019
2 Min Read
4B vise splices
4B vise splices are mechanical splices and fasteners for use on most PVC and rubber elevator belts. Each splice unit is made of three pieces. The outside plates have two different gripping areas. The ribbed gripping area is mounted towards the face of the belt. The opposite end has a series of both longitudinal and axial "teeth." The center plate is symmetrical and cannot be improperly installed around its elongated center hole. The splice functions by using the tension supplied by the belting. This tension on the belt ends pulls the outer plates apart, and forces gripping pressure towards the teeth on the splice unit. The greater the belt tension, the more pressure is exerted on the gripping teeth at the forward end of the splice.
4B Components Ltd, Morton, IL 309-698-5611 www.go4b.com/usa
Here are other mechanical conveying articles:
How Industry Expertise Ensures Correct Flexible Screw Conveyor Selection and Process Uptime
Tubular Conveying is Not So Obvious Until You Look Inside
4 Signs of Bucket Elevator Inefficiency
You May Also Like
Capacitive Sensor Has IO Link TechnologyMar 4, 2024|1 Min Read
Webinar: State of the Art in Screening & Separation of Powders & Bulk SolidsMar 4, 2024|1 Min Read
USDA Recalls: February 2024Mar 1, 2024|4 Min Read
EPA Protects At-Risk Communities Near Chemical PlantsMar 1, 2024|1 Min Read