Powder/Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Size Reduction

  • IPEC Introduces New High-Speed Rotormills

    November 14, 2019

    IPEC introduces a new series of high-speed rotormills that are available in all the normal sizes and are now being built using new high-strength steels. Fully developed welding techniques for running with proper safety factors at yet higher speeds are used, providing increased capabilities to...

    comment
  • Dry Milling System Available in Three Configurations

    November 12, 2019

    The IKA Pilotina is a dry milling system in pilot plant scale, available in three different configurations. The Pilotina MI is equipped with an impact mill module and the IKA Pilotina MC with a cutting mill module, to provide the optimum mill for each respective milling task. The Pilotina MU is...

    comment
  • Hammermill Features High Hammer-Tip Speed

    November 12, 2019

    Roskamp Champion’s HM Series 54-in. hammermill is used in aquaculture, pet food, ethanol, and biomass applications, as well as to grind other friable materials. Designed for the most demanding applications, this hammermill features a high hammer-tip speed in addition to a...

    comment
  • Lödige Strengthens Indian Joint Venture

    November 12, 2019

    The Paderborn-based company Gebr. Lödige Maschinenbau GmbH is currently in the process of expanding its engineering and production capacities for coating, mixing, granulating, and drying, as well as the handling units required for this process in India. This represents an expansion of the...

    comment
  • Powder King Offers Embedded Controller for Mills

    November 11, 2019

    Powder King introduces the proprietary EC200 operating control system. The new HMI and EC200 embedded controller replaces a PLC and several other devices. All necessary inputs and outputs are built in, simplifying the system design, operation, and maintenance of the control system. It supports...

    comment
  • High-Shear Mixer Has Multi-Blade Chopper

    October 29, 2019

    ACG Engineering offers the Quest HSM III high-shear mixer that incorporates 12-bar pressure shock resistance and the X-One Command process control system. Designed to facilitate compliance with cGMP standards, the versatile Quest HSM III features interchangeable process bowls of 15, 30, and 65 l,...

    comment
  • Bühler Introduces Mill E3 Milling Technology

    October 15, 2019

    With Mill E3, Bühler revolutionizes the milling industry and sets new standards in cost-effective building investment, project realization time, and energy consumption. “After the introduction of automation 40 years ago, Mill E3 is the next big step forward in milling,” said...

    comment
  • Granulators with New Digital Control System

    October 10, 2019

    Hellweg introduces granulators with new digital smart control systems. This enables networked communication of the machines with upstream and downstream components, as well as with operators, in line with Industry 4.0 Internet of Things (IoT) principles. The new system measures and stores power...

    comment
  • Knife Mill Provides Homogeneous Samples

    October 2, 2019

    The knife mill Pulverisette 11 provides a homogeneous sample in a short time due to its design. Each subsample taken from any location in the grinding vessel is representative for the original sample and thus ensures an exact, significant analysis. That is for a wide range of different materials,...

    comment
  • Crusher Feeding with Arched Plate Conveyors

    September 18, 2019

    In 2015, Cementownia Warta made the decision to install an Aumund arched plate conveyor for hopper discharge of clinker and sticky raw materials such as natural gypsum. Just one year later Aumund supplied another arched plate conveyor to the Warta plant in Dzialoszyn to feed limestone to the...

    comment

Pages