Powder/Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Dust Collection Systems: 10 Common Questions

    The performance of a dust collection system is dependent upon numerous factors that vary from one system to the next. Dust particle size, duct diameter, the number and location of collection points are a few of these components, but there is so much more to consider when designing a system. Slight...

  • Heavy-Duty Bag Grippers for Palletizing

    If your automation cell requires a palletizing or de-palletizing end-of-arm tool, Piab offers components and systems that make robots function precisely and efficiently. The modular and custom-machined component designs of these products allow EOATs to operate on any make and style of robot. Piab...

  • Remote Equipment Monitoring System

    Bulk materials handling specialist Spiroflow has launched a monitoring system that remotely provides real time information on the performance of its complete machinery range, from flexible screw conveyors to tubular drag and aeromechanical conveyors. The SAM (Spiroflow Active Monitoring) system...

  • Industrial Magnetics Inc. Obtains USDA AMS Acceptance Certification

    Industrial Magnetics’ magnetic separation equipment has been accepted and certified for use in dairy, meat, and poultry applications. The acceptance certifies IMI’s products to be acceptable and suitable for direct contact with food product. The acceptance certifications are based on...

  • Dual-Motor Screeners

    The Concept Screener Line (CSL) units from Best Process Solutions (BPS) are powered by twin rotating motor vibrators designed to give a linear and straight line type conveyance action. The unit propels the product forward with a positive conveyance action designed to offer better stratification...

  • Wingdoor Sifter

    Dinnissen developed the wingdoor sifter with improved inspection methods to prevent cross contamination. The sifter is a combination of power and the sieving process. The major advantage of this machine is that the doors can now open over its entire length. Therefore, the sieve does not need to be...

  • Rob Ward Takes Helm at PEMA

    Rob Ward, president of U.S. operations, Russell Finex Inc., was elected 2019 president of the Process Equipment Manufacturers’ Association (PEMA) during the Annual Meeting, Mar. 27-31, held at The Confidante, in Miami, FL. Also elected to office were PEMA vice president Rod Henricks,...

  • Twin-Piston Slide Gates

    SBT twin piston slide gates are designed for a wide range of gravity flow applications. The one-piece cast bodies and heavy-duty components ensure reliable low-maintenance operation for many years. The twin piston design decreases the overall length of the gate and assures reliable actuation of the...

  • 1000-Gal Pivoting Triple Shaft Mixer

    The Ross VMC-1000 VersaMix is a 1000-gal triple-shaft mixer available on a pivot-design single-post hydraulic lift.  The new design pictured allows the machine to be raised from a vessel, rotate 90°, and lowered into another vessel. This allows for convenient discharge of finished product...

  • Gyratory Reciprocating Screener

    The APEX screener is built to meet customer screening requirements. It combines the Rotex gyratory reciprocating motion, which provides maximum product recovery, with an ergonomic design. The APEX can be fully maintained by a single-operator in a matter of minutes, reducing handling expenses and...

Pages