Sign up for the Powder & Bulk Solids Weekly newsletter.
July 23, 2010
1 Min Read
American Pulverizer Co. and Hustler Conveyor Co. have been selected by Hawk Steel in Kennendale, TX to supply an offline non-ferrous metal separation system for its existing American Pulverizer Co. automobile and scrap shredding system.
The system should be in operation early September of this year. It includes a Hustler Tumbleback metering conveyor, trommel screen designed for three size splits of materials that will be fed to the fines separator, standard Eddie current, and overs (5-in. plus) going to a picking conveyor.
The system also includes an S&S (Sicon technology) induction coil machine for further removal of non-ferrous materials. The platforms are designed for access to all of the equipment and offer multiple pick areas for more efficiency. The system is designed to allow operators to re-circulate any of the separated streams for further recovery of materials allowing for higher percentage of non-ferrous recovery per ton of ferrous scrap produced.
For more information on American Pulverizer Co., visit www.ampulverizer.com. For more information on Hustler Conveyor Co., visit www.hustler-conveyor.com.
You May Also Like
Mars Announces Partnership with Unreasonable GroupFeb 20, 2024|2 Min Read
Pros and Cons of Vibratory Tube Conveyors and Screw ConveyorsFeb 20, 2024|5 Min Read
Eriez Names Klinge Director of EMEA Operations & StrategyFeb 20, 2024|1 Min Read
Automated Weigh Batching of MSG Increases Output, Ends Fatigue at Goya FloridaFeb 20, 2024|4 Min Read