May 2, 2017

1 Min Read
Explosion Pressure Relief
REMBE's Targo-Vent

Targo-Vent is an opening angle limiter developed especially for REMBE explosion panels that guides the pressure relief specifically into areas, in which there is no danger to the adjoining infrastructure. The Targo-Vent absorbs the enormous repulsive forces of the explosion energy and guides the flames and shock wave in the desired direction. Depending on the particular application/equipment, the flames and shock wave are diverted at a defined angle of approx. 30-45° upwards or to the side. Facility operators can therefore minimize the safety areas around the vent opening. The usable area is increased. A further advantage of Targo-Vent is that the top module is made in standard explosion panels sizes, so retrofitting on existing REMBE explosion panels can be undertaken without a problem. Retrofits or building additions are protected by Targo-Vent without the need to significantly alter the explosion protection plan of the existing facility.
REMBE Inc., Charlotte, NC 704-716-7022 www.rembe.us

Click here to read about REMBE's EVA HE controller for the C-Lever flow metering system

Click here to read about REMBE's Exkop isolation system


 

Sign up for the Powder & Bulk Solids Weekly newsletter.

You May Also Like