Fully Assembled Panels for Easy Weighing IntegrationFully Assembled Panels for Easy Weighing Integration
July 31, 2018
Hardy Process Solutions has added over 300 integrated panel solutions (IPS) that simplify the installation process by delivering weighing instrumentation pre-installed into a variety of enclosures, complete with wiring, waterproof glands, and full testing.
Customers benefit by receiving an out-of-the-box solution, and avoid having to coordinate between third-party component suppliers and panel shops to create a product that is ready to install.
Manufactured in the U.S. in a UL508A Certified panel shop, in type 4 or 4X enclosures, IPS accommodate weighing instrumentation and peripherals including buttons, switches, relays, and summing cards. IPS are delivered in a variety of materials, shapes, and types with technically advanced weighing instruments, complete with a wide range of interface options for automation and process control systems. With features such as push buttons, switches, relays, and tower lights built in, IPS are easy to integrate into complex industrial manufacturing operations.
Hardy supports most major industrial protocols and is Rockwell Automation’s only weighing partner to achieve the Premier Integration status (the highest level of integration with Rockwell Automation ControlLogix and CompactLogix systems).
“By offering hundreds of pre-designed configurations, we simplify integration into customers’ manufacturing systems, saving time in configuration and installation,” said Tim Norman, senior product manager for Hardy Process Solutions. “With add-on-profiles and faceplates, we enable manufacturers to get up and running faster and with just one supplier.”
Each IPS includes:
1) One or more Hardy HI 4050, HI 6500, HI 6500-XP, or HI 6600 series instrument configured with any number of options, mounted on DIN Rail in a hinged type 4 or 4X enclosure with the associated pass through glands for power, communications, up to four sensors and up to three output cables
2) Optional pre-installed/pre-wired display mounted onto the enclosure door and located in the center of the upper half of the door allows an area for buttons and switches to be located in the lower half of the enclosure door
3) Optional pre-installed/pre-wired Hardy HI6020IT summing card with connectors mounted in the back of the enclosure on stand-offs, simplifying wiring for multiple load cells
1) 22mm metal pushbuttons and associated indelible marking. Available buttons are currently blue (reset), black (zero) and white (tare) and are located in the bottom half of the enclosure door.
2) N position selector switch and associated indelible marking to indicate modes of operation for gross or net located in the bottom half of the enclosure door
3) A three-mode tower light wired to the instrument on the top of the enclosure
4) Opto22 relay backplane to accommodate a large variety of relay choices in AC, DC, low and high current, mechanical and solid state
Hardy Process Solutions, San Diego, CA 858-278-2900 www.hardysolutions.com
You May Also Like
Kingspan Launches Bio-Based Insulation Made from HempNov 30, 2023
Abbvie to Acquire ImmunoGen for $10.1 BillionNov 30, 2023
Tyson Opens Fully Cooked Food Production PlantNov 29, 2023
Nestlé Puts Resources Into Plastics RecyclingNov 29, 2023