Webinar: Common Dust Collector Dos That Should Be Don’ts and How to Fix Them

This webinar will point out installation issues, explain why they are wrong, what ill affects they have on the dust collection system, and how to avoid them.

Kevin Cronin, Editor-in-Chief

June 23, 2021

1 Min Read
Diane_Cave_ELEMENT6_SOLUTIONS.jpg
Image courtesy of Element6 Solutions

On Thursday, July 13, 2021 at 2 p.m. Eastern/11 a.m. Pacific, Diane Cave, regional manager of Eastern Canada, Element6 Solutions, will present "Common Dust Collector Dos That Should Be Don’ts and How to Fix Them" as part of Powder & Bulk Solids' DryPro webinar series.

With dust collection systems there seems to be various installation issues that pop up all the time. Common mistakes if you will. This webinar will point out these installation issues, explain why they are wrong, what ill affects they have on the dust collection system, and how to avoid them. The webinar will also touch other alternative installations that would work better.

Attend this webinar and learn:

  • Good engineering practices with respect to dust collection systems

  • What common mistakes they are likely making, why they are bad and how to fix them

Cave has spent the past 16 years working with the design, installation, and retrofitting of dust collection systems in industries ranging from sawmills and grain installations to food and beverage and specialty chemicals. Her expertise covers all aspects of dust collection systems from troubleshooting system issues to upgrading systems to meet current codes and standards. Cave has also assessed hundreds of dust collection systems for combustible dust hazards using the latest NFPA codes and standards. She can also provide advice and design experience for explosion protection systems, vessel retrofits, Pred verification, and static bonding and grounding. Cave has a degree in Chemical Engineering from Dalhousie University in Halifax, Nova Scotia.

Register for this webinar
 

About the Author

Kevin Cronin

Editor-in-Chief, Powder & Bulk Solids

Kevin Cronin has been editor-in-chief, Powder & Bulk Solids, for 35 years. For several years, he also edited food and chemical industry publications. He received a B.A. in communications—with a concentration in journalism—from the University of Scranton, Scranton, PA, in 1988.

Sign up for the Powder & Bulk Solids Weekly newsletter.

You May Also Like