Magnet Applications Advances 3D Printed Magnets

November 29, 2016

2 Min Read
Magnet Applications Advances 3D Printed Magnets
3D printed magnet

Magnet Applications Inc. (MAI), a North American manufacturer of compression bonded magnets and a leading manufacturer of injection molded magnets, hybrid magnets, and magnetic assemblies, announces a breakthrough in 3D printed neodymium iron boron (NdFeB) magnets.

Working together with researchers at Oak Ridge National Laboratory, engineers from MAI have proven that permanent magnets produced by additive manufacturing (commonly referred to as 3D printing) outperform bonded magnets using traditional methods with less waste.

A Bunting Magnetics Co., MAI manufactured the starting composite pellets with 65 volume percent isotropic NdFeB powder and 35 percent polyamide nylon-12 binder in a precise ratio, blended to a consistent texture. The 3D printing was performed at the Manufacturing Demonstration Facility at Oak Ridge National Laboratory with the Big Area Additive Manufacturing (BAAM system). Oak Ridge National Laboratory is a Tennessee-based science and technology laboratory managed by the United States Department of Energy. The complete study is published in Scientific Reports.

“Additive manufacturing in magnets provides multiple benefits,” said Dr. John Ormerod, senior technical advisor, MAI. “They have more design flexibility, which is especially beneficial in sensor technology and it creates less waste than in the traditional sintering process.”

NdFeB magnets are the most powerful on earth, and used in everything from robotics, wind turbines, electric vehicles, cell phones, electric motors, and other consumer and industrial equipment.

“With rapidly advancing technologies, the ability to manufacture the strongest magnet available in any shape without tooling, in any quantity, unleashes so many design opportunities,” Ormerod continued. “The work has demonstrated the potential of additive manufacturing to be applied to wide range of magnetic materials and assemblies.

“Magnet Applications and many of our customers are excited to explore the commercial impact of this technology in the future.”

With control over the size and shape of the magnet – as well as the magnetic field – further research will include printing magnets in various strengths with preferred direction of magnetization.

Contributing to the project were Ling Li, Angelica Tirado, Orlando Rios, Brian Post, Vlastimil Kunc, R. R. Lowden, Edgar Lara-Curzio at ORNL, as well as researchers I. C. Nlebedim and Thomas Lograsso, working with CMI at Ames Laboratory. Robert Fredette and John Ormerod from MAI contributed to the project through an MDF technology collaboration. The DOE’s Advanced Manufacturing Office provides support for ORNL’s Manufacturing Demonstration Facility, a public-private partnership to engage industry with national labs.

Click here for information about the Powder & Bulk Solids Montreal Showcase

For related articles, news, and equipment reviews, visit our Screening & Separation Equipment Zone

Click here for a List of Screening & Separation Equipment

Sign up for the Powder & Bulk Solids Weekly newsletter.

You May Also Like