Powder & Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Mobile Dumper-Conveyor System Performs Multiple Tasks

Article-Mobile Dumper-Conveyor System Performs Multiple Tasks

Flexicon mobile drum dumper-conveyor system
Flexicon mobile drum dumper-conveyor system

This new mobile drum dumper-conveyor system from Flexicon allows dust-free dumping of bulk solid materials from drums, and/or conveying it to process equipment and storage vessels throughout the plant.

The system’s Tip-Tite drum dumper accommodates drums from 30 to 55 gal, weighing up to 750 lb and measuring 36 to 48 in. high. Mounted on a mobile frame with quick-action floor jacks, it raises the drum hydraulically to form a dust-tight seal between the rim of a drum and the underside of the discharge cone. A separate hydraulic cylinder tips the platform-hood assembly and drum, stopping at dump angles of 45, 60, or 90 degrees with a motion-dampening feature. The vertically-oriented cone mates with a gasketed inlet port fitted to the hopper of the system’s flexible screw conveyor, and to any low-profile equipment throughout the plant. A pneumatically-actuated slide gate valve prevents material flow until the discharge cone has been properly seated in the gasketed receiving ring.

The mobile Flexicon screw conveyor, which can operate independently or mated to the drum dumper, can feed material to elevated process equipment and storage vessels. The only moving part contacting material is a rugged inner screw which can move both free- and non-free-flowing materials with no separation of blended products. The screw is driven beyond the point of discharge, preventing material contact with seals or bearings. Removal of the hopper lid allows manual dumping and feeding from upstream equipment.

Flexibility of the dumper and conveyor to handle a diversity of materials independently or in tandem throughout the plant enables the system to satisfy a range of current and future requirements, according to the manufacturer.

Ready to plug in and run, it is constructed of carbon steel with a durable industrial finish and is available with stainless steel material contact surfaces or in all-stainless construction finished to food, dairy, pharmaceutical, or industrial standards.

Flexicon Corp., Bethlehem, PA 888-353-9426 www.flexicon.com

Here are other mechanical conveying articles:

How Industry Expertise Ensures Correct Flexible Screw Conveyor Selection and Process Uptime

Tubular Conveying is Not So Obvious Until You Look Inside

4 Signs of Bucket Elevator Inefficiency

Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.