Magnetic Drawer-in-Housing 1131

February 3, 2010

1 Min Read
Powder Bulk Solids logo in a gray background | Powder Bulk Solids

The Simple Clean magnetic drawer-in-housing is easier to clean than traditional "manual clean" models. It incorporates a non-magnetic "dead-zone" at the end of the magnetic tubes that sits well outside the product flow during operation and does not interfere with metal capture rates. During cleaning, this allows the operator to take a gloved hand or shop rag and wipe any collected metal down to the dead-zone where it simply falls off as it becomes free of the magnetic field. The housing is available in two- or three-row configurations with standard inlet/outlet lengths and widths from 6-24 in. in 2-in. increments. Custom designed housings (round or rectangular) with custom transitions, food grade finishes, and wear-resistant coatings are also available. 
Industrial Magnetics Inc., Boyne City, MI 800-662-4638 www.magnetics.com

Sign up for the Powder & Bulk Solids Weekly newsletter.

You May Also Like