Schade Lagertechnik to Deliver Portal Scraper for Chrome Ore to Kazakhstan

March 6, 2012

2 Min Read
Powder Bulk Solids logo in a gray background | Powder Bulk Solids

Early in 2012 Schade Lagertechnik will deliver a portal scraper (rail track 48m, conveying capacity 500 tn/hr) for chrome ore to JSC TNK Kazchrome. It will be employed in Aktobe near the Russian border, in north-west Kazakhstan. Kazchrome is part of the ENRC Group and is a major ferrochrome producer. The company operates several large ferrochrome plants in Kazakhstan.

The new portal scraper spans the stockpiled ore and travels back and forth longitudinally over the stockpile. In this instance and owing to the abrasiveness of the material, Schade is employing a scraper chain furnished with a wing roller, the bearing being arranged directly on the shaft. The latter was especially developed for highly abrasive bulk materials. The drag link conveyor chain will be used in particular where chain lubrication is not permitted. It is furnished with hardened bolts and bushings which keep the wear factor at a low level. Each link of the bushed chain is additionally equipped with bearings and wing rollers which run in the chain guide. The rollers are furnished with bearings and special seals. An automatic chain tensioning device also ensures a low maintenance requirement. The drive shaft sits in sealed bearings and is fitted with two welded tumblers featuring exchangeable special steel tooth segments.

The portal scraper transports the bulk material away in layers from the side slope and guides it over a concrete ramp onto a belt conveyor which is arranged longitudinally adjacent to the stockpile. At the end of the bulk material stockpile the scraper boom lowers by a depth of cut. Then the scraper carries away the next layer in the opposing direction of travel. This process is repeated until the stockpile has been reclaimed in its entirety.

Reclamation takes place automatically, with the cutting and grading of the stockpile usually performed manually by the operators in Aktobe. During reclamation chains and drives run continuously whilst the angle of slope of the stockpile and the front ends of the stockyard are monitored automatically. This monitoring enables the scraper to travel up to the headwall, save for a minimal safety distance. Simultaneous monitoring of the angle of slope prevents the collapse of the side of the stockpile.

SCHADE Lagertechnik GmbH is among the leading manufacturers worldwide of equipment for bulk material stockyards and blending beds for all major sectors. The company was founded in 1879 and is headquartered in Herne. It has belonged to the Aumond Group since 2001.

Sign up for the Powder & Bulk Solids Weekly newsletter.

You May Also Like