Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Accessories

  • BETE Fog Nozzle Installing Solar Panels at Corporate Headquarters

    November 12, 2012

    BETE Fog Nozzle Inc., a leading industrial spray nozzle designer and manufacturer, has initiated installation of solar panels to generate clean electricity and reduce the company’s environmental impact. According to Matthew Bete, president of BETE Fog Nozzle, “This installation of...

    comment
  • Hartzell’s Tom Gustafson Appointed to AMCA Board of Directors

    November 12, 2012

    Tom Gustafson, chief technology officer at Hartzell Air Movement, was appointed to the Board of Directors of AMCA International at its annual meeting on October 19, 2012. Prior to being appointed to the board, Gustafson served on numerous committees at AMCA International, and is an expert in the...

    comment
  • Disk Fluidizers

    November 12, 2012

    Solimar offers disk-type fluidizers for the discharge of powders and bulk solids. This complete line offers long-wearing aeration devices for many applications including silos, hoppers, bins, and trailers. The fluidizers are particularly effective at preventing rat-holing and bridging by utilizing...

    comment
  • Heat Eliminating Cold Gun Is Now CE Compliant

    November 2, 2012

    In addition to producing a cold, quiet stream of air to reduce heat buildup on machining operations, EXAIR’s Cold Gun Aircoolant System has also met the rigorous safety, health, and environmental standards of the European Union in order to attain the CE mark.      The Cold...

    comment
  • Chemical Suppression System

    October 18, 2012

    CV Technology has added the Interceptor-HRD chemical suppression system to its explosion mitigation line. The Interceptor-HRD is designed to provide an active method to protect process system equipment from a dust explosion hazard. The principle of operation is detection of the pressure rise during...

    comment
  • High-Temperature, High-Efficiency Fan

    October 17, 2012

    This fan is for accelerated temperature applications, typically ovens, kilns, and dryers. Named Design 70, the new plug fan is recommended for installations where hot airstreams need to be circulated or exhausted at temperatures up to 1000°F. Since the larger oven systems require more capacity...

    comment
  • Certified Industrial Panel Products

    October 15, 2012

    Pepperl+Fuchs has received UL Class I Division 2, ATEX Zone 2, and IEC-Ex Zone 2 certification on its 15- and 19-in. industrial panel products. This product line includes the PC8200 series panel PCs, KM8200 Series monitors with integral KVM, and RM8200 Series remote monitors. These products can be...

    comment
  • Matthews Named Territory Sales Manager at Abresist

    October 15, 2012

    Dan Matthews of St. Louis was named territory sales manager for Abresist Kalenborn Corp. in Missouri, Kansas, Iowa, Nebraska, and South Dakota. The company manufactures mineral-, ceramic-, and metallic-based, abrasion-resistant protective linings for material handling equipment.   ...

    comment
  • ProFlapPlusII Passive Explosion Isolation Valve

    October 9, 2012

    The ProFlapPlusII explosion isolation valve is a passive device that self-actuates by the pressure wave created by an explosion inside a vented vessel and prevents flame propagation to upstream processes. Triggering sensors or controllers are not necessary to actuate the valve, and valve component...

    comment
  • Power Roof Ventilators

    October 8, 2012

    Hartzell Air Movement has redefined the power roof ventilator with an advantage to decrease service time while eliminating the risk of moisture. The addition of a zero-leak service door moves both the propeller and motor out of the airstream. This new design with a zero-leak seal is a reaction to...

    comment

Pages