Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Classifying Impact Mill

    The Sturtevant FCM is a classifying impact mill capable of narrow particle size distribution from 95% below 250 micron (95% passes through 60 mesh) to 90% below 10 micron (90% passes through 1250 mesh). It is a workhorse in particle size reduction applications due to its combination of impact...

  • The Capability of Bulk Particulate Materials for Pneumatic Conveying

    For research studies fly ash is an ideal material as it is readily available in a wide range of particle sizes. Research has shown that such materials with a mean particle size greater than about 70 microns can only be conveyed in dilute phase, suspension flow, with a minimum conveying air velocity...

  • Powder Handling Equipment Control Systems

    The best manufacturing equipment systems only perform as well as the controls designed to run them. To maximize up time and help avoid production breakdowns, Spiroflow designs and builds controls for its range of powder handling equipment. A team of engineers liaise extensively with customers to...

  • New Swing-Away Magnet Grate

    Magnattack's new RapidClean swing-away-style magnet grate is designed for applications with low headroom. The design improves access to magnet rods, minimizes spillage, and is dust tight to protect product. The proprietary RE80 and RE80 HT ultra-high-energy magnets provide high separation...

  • Pneumatic Weigh Filling System

    This pneumatic gain-in-weight filling system conveys and weighs free-flowing bulk solids and discharges the material into bulk bags dust-free. The filter receiver of a Pneumati-Con vacuum dilute-phase pneumatic conveying system is mounted on load cells, enabling the controller to stop the flow of...

  • New Supplied Air Extruder Hood Reduces Contamination

    The new supplied air extruder hood is a key component of the Schenck Process supplied air negative airlift that conveys extrudate from extruder to dryer with HEPA-filtered or treated convey air instead of potentially contaminated air from the extruder room floor. This is important to all food and...

  • New Portable Dust and Fume Collector

    The Shadow portable dust and fume collector has many of the best features of the full-sized CMAXXTM, including DeltaMAXX nanofiber filters and powerful pulse cleaning. “Customers have told us they need a portable dust and fume collector,” said Jeremiah Wann, owner and president of...

  • Custom Material Handling System Maximizes Flexibility

    A leading recycler of nickel-based alloys located in the eastern U.S. contacted Erie Technical Systems Inc. with a requirement to fill multiple drums on a skid, while automatically maximizing the fill weight for each of the containers. The customer contacted Erie Technical Systems because of a...

  • Micro Mist Spray Dryer

    Fujisaki Electric has released the MDL-015(C)M-H high-temperature MMSD laboratory spray dryer. Features include: Hot air temperature can be increased up to 1112°F; evaporation speed is up to 2.2 lb/hr, exit temperature is 572°F). Single micron order - spherical powder can be...

  • Endress+Hauser Adds EtherNet/IP to Data Manager

    Endress+Hauser adds EtherNet/IP capability to the Memograph M RSG45 data manager. The RSG45, a data acquisition system for small process control applications, now provides a cost-effective way to integrate legacy 4-20mA, RTD, thermocouple, and HART-based instruments into a modern control system...

Pages