Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Screening & Separation

  • W.S. TYLER to Distribute New Age Hosokawa ALPINE Air Jet Sieve e200 LS

    October 24, 2012

    W.S. TYLER announced it is the exclusive distributor in North America for the Hosokawa ALPINE Air Jet Sieve e200 LS for particle size analysis. ALPINE developed the process of air jet sieving more than 50 years ago and launched the first air jet sieve into the market. Air jet sieving is an...

    comment
  • Oblong Opening Mesh

    October 24, 2012

    Stainless steel woven wire mesh with precise opening is now available from Asada Mesh. The accuracy is less than ±10%, which is stricter than JIS8801-Test Sieves Spec. The data measured maximum and minimum values of openings at 100 points with 5 types of our stainless mesh, which shows the...

    comment
  • Reciprocating Drawer Magnets

    October 22, 2012

    To eliminate the trade-off between effective magnet coverage and potential product “choking,” MPI developed its patented reciprocating drawer magnet (RDM). The RDM features reciprocating tube magnets that act as knives to break up the product as it flows through the tubes, allowing it...

    comment
  • PPS Air Classifier Mill

    October 22, 2012

    The PPS air classifier mill incorporates an internal air-classifying wheel with an independent drive giving precise control over “particle cut point” selection. Suitable for batch processing or continuous operation this range of mills serves all industries producing fine powders where...

    comment
  • Kraus K-Series Screen Feeder

    October 18, 2012

    The Kraus K-Series screen feeder is a screen and feeder combination using a single- or double-deck screen with a brute force drive and a single electric vibrating motor. It is ideal for screening dry granular material from one inch down to 100 mesh particle size. The K-Series screen feeder can be...

    comment
  • Magnetic Housing for Pneumatic Line Applications

    October 17, 2012

    IMI has added a Simple Clean version to its Pneumatic Line Housing (PLH) family. From the platform of the EZ-Clean and Self-Clean versions, the Simple Clean represents an economic solution, while still providing excellent metal separation for pneumatic conveying applications. ...

    comment
  • Stacked Deck Sifter for Quick Screen Change Outs

    October 15, 2012

    This stacked deck sifter allows quick screen change outs. Whether a screen needs replacement due to a tear in the screen cloth, a change in mesh specifications, or when switching from one product to another, the CS-1 gyratory sifter saves time and labor. With the use of only standard hand tools,...

    comment
  • High-Torque Screen Classifying Cutter

    October 11, 2012

    The new high-torque, low-speed model SCC-15-SS screen classifying cutter reduces hard materials and friable products into controlled particle sizes. A proprietary rotor design is comprised of cutter bits attached to a helical array of staggered holders, called “interconnected parallelograms,...

    comment
  • Practical Uses of Metal Detectors for In-Flight Applications

    October 11, 2012

    Most of us are familiar with common uses of magnets and metal detectors for gravity free fall of loose product, or inspection of finished bags and boxes. As the needs of industry have changed over time, so has the application of metal detection equipment in a processing environment. The use of...

    comment
  • HF Inverting Filter Centrifuge with Direct Contact Drying

    October 10, 2012

    The HF model centrifuge incorporates inverting filter technology, thin cake processing technology, and PAC direct contact drying of the material, all in one machine for separation/filtration. With these combinations of technologies, it is possible to dry product inside of the centrifuge, thereby...

    comment

Pages