Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Feeders

  • Weigh Screw Feeder

    September 3, 2013

    Continuous flow measurement is accomplished with a cantilevered screw feeder with pivot centered under the in-feed of the feeder with the feeder suspended from a load cell hung from the discharge end. Flow rates are 7-170 cu m/hr, with a turn down ratio of 5:1. Accuracy rate is +/-1% full scale....

    comment
  • Mobile Recirculating Spreader-Feeder

    August 29, 2013

    This recirculating spreader-feeder evenly distributes powder and bulk coatings onto food products as they pass between the unit's longitudinal discharge hopper and its lower collection hopper. The mobile unit is positioned so a wire conveyor belt with items to be coated, passes above the unit...

    comment
  • Digital Dosing System

    August 23, 2013

    AEC’s DD Series digital dosing system makes material changes simple, saving time, materials, and money. The DD Series offers precise feeding for almost any plastics machine, including injection molding, blow molding, and extrusion. The DD Series design simplifies material changes. Just lift...

    comment
  • Rotoscoop Airlock Feeder

    August 22, 2013

    The Rotoscoop is a self-cleaning rotary airlock feeder that can be sued to feed or discharge wet, sticky materials that tend to build-up on most surfaces. The synchronized cleaning blades sweep each pocket on every revolution to clean any remaining material and guarantee that the pocket is emptied...

    comment
  • Meyer Klean-In-Place II Rotary Airlock Feeder is USDA, FDA, Dairy 3A Approved

    August 8, 2013

    The Meyer Klean-In-Place rotary airlock feeder is a special purpose valve suited for dairy, pharmaceutical, food, baking, chemical, paint, and powder coating applications.   All that is needed to simply remove the rotor from the housing is a common 3/16 in. Allan wrench. The re-designed...

    comment
  • Pressure Compensation: Don’t Blow Your Top Over It!

    August 7, 2013

    Certain applications that we run into often require that we feed into a reactor, pressure vessel, high-speed mixer, vacuum/pneumatic conveying line, or that we provide a gas drying blanket (i.e. nitrogen or clean dry air) to a hopper extension in order to keep the material dry.    ...

    comment
  • Automated Batch Feeders

    July 17, 2013

    Brabender Technologie Inc. manufactures feeding equipment for small to medium capacity, high-precision, continuous, or batch weigh feeding applications. Several alternatives are available for automated dry ingredient batching: loss-in-weight and add weigh; micro batch for batches as low as 50 g;...

    comment
  • Loss-in-Weight Feeders Provide High Accuracy

    July 16, 2013

    Vibra Screw offers loss-in-weight (LIW) feeders that provide accuracies to ± 1/4% to 1/2%, weighing ounces to tons and feeding materials from fine powders to fibrous or flaky materials. Control of batch size and feed time is provided through a microprocessor-based controller that eliminates...

    comment
  • High-Accuracy Weighing and Batching

    July 16, 2013

    The GYRO EX Series 920 feeder/discharger is both a loss-in-weight feeder and a bin discharger, all in one unit. Using the power of rotary vibration, it generates a pure gyratory motion to feed almost any granular material, irrespective of particle size or difficult handling characteristics. Also, a...

    comment
  • MST Corporation

    comment

Pages