Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology


  • Schwing Bioset Inc.

  • Kleen Volumetric Screw Feeder

    September 12, 2013

    The new Kleen volumetric feeder was developed for minors and micros use in the food, pet food, and plastics industries, for small to medium feed rates. The modular system can be adapted to different upstream sources, such as bag dumps, totes, or bulk bags. Its clean design minimizes surfaces and...

  • Automated Batch Feeding

    September 11, 2013

    Brabender Technologie Inc. manufactures feeding equipment for small- to medium-capacity, high-precision, continuous or batch weigh feeding applications. Several alternatives are offered for automated dry ingredient batching: loss in weight and add weigh; micro batch for batches as low as 50 g;...

  • K-Tron to Operate under Coperion K-Tron Brand

    September 10, 2013

    Effective October 1, 2013, K-Tron, a global leader in feeding, dosing, and pneumatic conveying equipment and systems, will operate under the brand name Coperion K-Tron. Coperion was acquired by U.S.-based Hillenbrand Inc. in December 2012. K-Tron has been a part of Hillenbrand’s Process...

  • Weigh Screw Feeder

    September 3, 2013

    Continuous flow measurement is accomplished with a cantilevered screw feeder with pivot centered under the in-feed of the feeder with the feeder suspended from a load cell hung from the discharge end. Flow rates are 7-170 cu m/hr, with a turn down ratio of 5:1. Accuracy rate is +/-1% full scale....

  • Mobile Recirculating Spreader-Feeder

    August 29, 2013

    This recirculating spreader-feeder evenly distributes powder and bulk coatings onto food products as they pass between the unit's longitudinal discharge hopper and its lower collection hopper. The mobile unit is positioned so a wire conveyor belt with items to be coated, passes above the unit...

  • Digital Dosing System

    August 23, 2013

    AEC’s DD Series digital dosing system makes material changes simple, saving time, materials, and money. The DD Series offers precise feeding for almost any plastics machine, including injection molding, blow molding, and extrusion. The DD Series design simplifies material changes. Just lift...

  • Rotoscoop Airlock Feeder

    August 22, 2013

    The Rotoscoop is a self-cleaning rotary airlock feeder that can be sued to feed or discharge wet, sticky materials that tend to build-up on most surfaces. The synchronized cleaning blades sweep each pocket on every revolution to clean any remaining material and guarantee that the pocket is emptied...

  • Meyer Klean-In-Place II Rotary Airlock Feeder is USDA, FDA, Dairy 3A Approved

    August 8, 2013

    The Meyer Klean-In-Place rotary airlock feeder is a special purpose valve suited for dairy, pharmaceutical, food, baking, chemical, paint, and powder coating applications.   All that is needed to simply remove the rotor from the housing is a common 3/16 in. Allan wrench. The re-designed...

  • Pressure Compensation: Don’t Blow Your Top Over It!

    August 7, 2013

    Certain applications that we run into often require that we feed into a reactor, pressure vessel, high-speed mixer, vacuum/pneumatic conveying line, or that we provide a gas drying blanket (i.e. nitrogen or clean dry air) to a hopper extension in order to keep the material dry.    ...