Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Dust Collection & Air Pollution Control

  • Duct Gate

    April 6, 2009

    The AutoAire cut-off gate automatically opens needed duct branches when a machine is turned on, while closing off inactive branches and machines. This fully utilizes the pick-up power of a collection system by applying as much vacuum as possible, only when and where needed, allowing a smaller fan...

    comment
  • Self-Dumping Hopper

    April 6, 2009

    This self-dumping hopper simplifies the disposal of dust captured by cartridge-style dust collection systems. Easier to use than conventional barrels or collection drums, the hopper is offered in two capacities (1 and 2 cu yd) and is ideal for a full range of dry dusts, including those that must be...

    comment
  • Replacement Filters

    April 6, 2009

    The Standard Main filter is composed of polyester and retains 99.1% efficiency at 1.5 microns. Star-shaped pleats add surface area, lowering the air-to-cloth ratio, and increasing filtration efficiency. The PVC Membrane filter is ideal for fine powders, commonly found in powder-coating facilities....

    comment
  • Baghouse Pressure Transmitters

    April 6, 2009

    The Model DP 20T (differential) and SP 20T (static) pressure transmitters feature a non-clogging design for mounting on the dirty side of a fabric filter baghouse or cartridge-style dust collector. The 4-20mA transmitters are more reliable than typical “tube” style electronic and...

    comment
  • Bin Vent/Dust Collector

    April 6, 2009

    The Series 250 Modu-Kleen bin vent/dust collector is designed to vent bins, storage silos, mixers, blenders, pneumatic conveying systems of any type, or any other device or process that must contain or control dust particles. It can meet the most stringent air pollution codes, is controlled by...

    comment
  • Filter Plenum Dust Collectors

    April 6, 2009

    These filter plenum dust collectors control light dust loads at a low initial cost relative to more elaborate dust collection systems such as wet collectors and baghouses. Ideal for plastic film and sheet processors, paper and film converters, and others where economy is paramount, the filter...

    comment
  • Heavy-Duty Dust Collection Systems

    April 6, 2009

    These large-volume dust collection systems can be engineered to any pressure and feature proven heavy-duty, high-stiffness construction to prevent housing failures and deliver long operating life. Automated pulse jet self-cleaning of filters maintains system pressure. Compressed air in 90-100 psi...

    comment
  • Differential Pressure Control

    April 6, 2009

    These two new digital pulse-cleaning control panels monitor differential pressure on the company’s line of cartridge dust collectors. The DPC gauge is designed for on-demand cleaning and is recommended for maximum performance when using advanced nanofiber cartridge filters. The gauge is...

    comment
  • Free Guide Offered on Dust Control Using Spray Technology

    April 1, 2009

    Dust prevention and suppression using wet dust control systems are addressed in a new in-depth guide published by Spraying Systems Co, A Guide to Spray Technology for Dust Control. The 20-page guide provides an overview of operations ideally suited to using spray technology to control dust and...

    comment
  • Dust Collector Controller

    March 23, 2009

    The FDC controller provides user-friendly pulse-cleaning control for all types of cartridge and baghouse dust collection systems. Using factory-programmed or customer-selected settings, the unit monitors pressure differential across the filters to ensure more efficient pulse cleaning, reducing...

    comment

Pages