Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Dust Collection & Air Pollution Control

  • Discharger Dust Hood Contains Bag Spout Leaks, Spills

    November 11, 2013

    A new dust hood for Flexicon bulk bag dischargers contains spillage and dust that can escape through seams in the bag and folds in the spout. The six-sided enclosure seats against the rim of a hopper or flange of downstream equipment, and is equipped with an exhaust port for dust collection and a...

  • Abrasion-Resistant Cyclone Linings

    November 11, 2013

    Cyclones handling abrasive products such as clinker dust or raw meal are often lined with Kalocer abrasion-resistant alumina ceramic tiles to extend the cyclones' operating life. These pre-engineered tile linings resist wear, abrasion, and corrosion from the materials being processed, reducing...

  • Dust Collection Diaphragm Valves

    November 6, 2013

    These diaphragm valves are used in a dust collector system. The valves consist of two air chambers divided by a piece of diaphragm. The two chambers are connected through an air passage (air passage's diameter is smaller than the orifice of the pilot valve). When the orifice opens, the air in...

  • Dust Collector with Product Contact

    November 4, 2013

    The PPS product contact dust collector has a 304 stainless steel body for use in food, dairy, and pharmaceutical industries. Top- and bottom-load designs are available. The model pictured features a bottom-load design that uses either high-efficiency filter bags or filter cartridges. Each PPS dust...

  • Wear-Resistant De-Duster

    November 1, 2013

    Dust in bulk solid materials including plastic resins, minerals, metal ores, aluminum chips, tablets, granular foods, and others may cause environmental hazards, housekeeping concerns, or reduced quality in the end product. Therefore, the removal of dust and other contaminants is an important part...

  • Low-Cost Filter Monitoring

    October 31, 2013

    The requirement to reliably detect dust levels in processes is increasing. Although modern filter installations are quite efficient, there is no guarantee that there will not be any filter breakdowns or leaks, from time to time. Those situations cannot be eliminated, but they can be quickly...

  • CMAXX Dust Collection System

    October 29, 2013

    The CMAXX dust collection system has a sleek new design and its filters contain the latest nanofiber technology to help preserve filter life. All CMAXX units are constructed with top-quality DOT/UV-grade silver pulse-valve tubing. When necessary, filter change-outs are fast and easy, due to an...

  • Imperial Systems Launches Dust Collection and Air Pollution Control Web Site

    October 18, 2013

    Imperial Systems announces the launch of its new Web site dedicated to its signature CMAXX industrial dust collectors and DELTAMAXX replacement filters, while also assisting companies with finding solutions for their commercial dust collection and air filtration needs. The new site at www....

  • Camfil Names Magnus Yngen President and CEO

    October 16, 2013

    Camfil Air Pollution Control’s (APC) parent company, Camfil (Stockholm, Sweden), has appointed Magnus Yngen to the position of president and CEO. Yngen succeeds Alan O’Connell, who held the post for the past 12 years and was instrumental in taking Camfil to its current position as a...

  • Powder & Bulk Solids Texas to Offer Five Dust Collection Sessions

    October 8, 2013

    Taking place next week in Houston, Powder & Bulk Solids Texas will offer the following sessions: OSHA Combustible Dust Update, Ashok Dastidar, Vice President, Fauske & Associates Inc. Dust Explosions - The Nature of the Problem and Practical Measures for its Control, Steven Luzik, Senior...