Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Molded Corrugated Sleeves

    Molded corrugated sleeves are the backbone of flexible connections. They are ideal for all types of vibratory and gyratory motion, including screeners, sifters, dryers, conveyors, hoppers, and more. Siftex offers three standard styles: Siftex, Sweco, and Rotex, in a variety of lengths, diameters,...

  • Loss-in-Weight Feeder

    This loss-in-weight feeder is designed to meter 60 lb/min of chemical additive, 100 tn/hr production stream. In order to maintain that feed rate 24 hours a day, the bulk bag is discharged into a 53-cu-ft vessel that, in turn, refills the LIW feeder hopper at approximately 20-minute intervals. The...

  • Wafer/Butterfly Valves

    Specially designed to handle dry materials, the wafer valve features a 316 stainless steel disk that seals against molded food-grade liner. Bulk materials only contact the liner and disk, with the low-profile disk able to rotate 90 degrees for maximum free-flow area. The liner also serves as a...

  • Side-Access Dual-Rotor Crusher

    This new side-access dual-rotor crusher allows for the screen/grid to be removed through the side plate without disturbing the discharge transition below the crusher. This allows the crusher to be installed where headroom is limited. This crusher can be cleaned and sanitized fast, and is ideal for...

  • Flameless Venting Device

    The Interceptor-QR is a NFPA 68-compliant and FM-approved flameless venting device. Flameless vents are comprised of two parts, an explosion vent and a quencher. The explosion vent is designed to relieve the pressure. Burning dust, flames, and hot gases all exit through the vent opening into the...

  • Weigh Batching from Bulk Bags Ups Efficiency

    A fire gutted a 9000-sq-ft building on the property of the Canadian head office and manufacturing and distribution center Scarborough, Ontario, Canada of the Henry Co., a manufacturer of commercial and residential foundation coatings, roofing products, caulks, adhesives, driveway sealers, and other...

  • Bucket Elevators for Explosive Applications

    Three main design features make TipTraks ideally suited to prevent the occurrence of explosions. These are: a polymer interlocking bucket assembly that is electrically conductive contiguous electrical grounding, explosion-proof motors, and explosion vent panels. Specific features of the conductive...

  • Form-Fill-Seal Bagger for Fine Powders

    The Continua FFS machine with six linear bagging positions is specifically designed for filling fine powders into hermetically sealed PE bags from 10 to 110 lb, with fully automatic format change on the whole line. Packaging rates up to 800 bags per hour for powders and 500 bags per hour with...

  • Planetary Mills Grind to Nanometer Range

    The new Fritsch premium line offers rotational speeds and ultrafine grinding results down into the nano range. Due to the time-saving premium grinding bowl locking-system, the automatic checking of the locks in the mill, the blocking in event of impermissible operating states, and the new automatic...

  • Ball Mills for Hard Inorganic Materials

    Steel ball mills and alumina ceramic lined mills are used primarily for the reduction of hard inorganic materials. Ball mills easily mill solids down to one micron or less with a narrow particle distribution. The mills are self-contained batch mills and eliminate the need for dust collectors,...

Pages