Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • RF Capacitance Point Level Sensor

    The TrueCap Model MK-2 RF capacitance point level indicator is designed for level sensing for a variety of material storage applications. The sensor has no moving parts for less wear. It features push-button calibration and sensitivity selection as well as a built-in automatic temperature...

  • Capacitance Level Control

    The Dense Flow capacitance level control is used to detect material in pressure vessels, storage hoppers, silos, etc. It operates with a 110-VAC electrical supply and requires a minimum load or resistor at all times (low voltage applications are available). The level controls are available in both...

  • Smart Inventory Monitoring Sensor

    The Model WC smart inventory monitoring sensor is a third generation weight and cable sensor for use in inventory measurement applications of powders and granular materials. Technological advances include Hall-effect sensing techniques and a direct MODBUS serial communication output. The sensor...

  • Process Control Systems and Batching Automation

    These control systems include integrating personal computers, programmable logic controllers, and equipment for weighing, batching, and process control systems. Using Windows-based hand prompt batching controls, these systems provide accurate minor ingredient weighing. An operator interface panel...

  • Weigh Feeder Control Module

    Easy to install and set-up, the weigh feeder control module mounts directly into an Allen-Bradley MicroLogix 1500 or CompactLogix chassis and supports Add on Profile set-up. Used in new feeder control applications, retrofitting inaccurate volumetric feeders, and replacing outdated controllers in...

  • Online & Laboratory NIR Moisture Sensors

    The IR3000 is an online moisture sensor developed for instant, non-contact analysis of powder and granular materials for the harshest environments. Insensitive to material variations such as particle size and material height, the IR-3000 provides continuous, accurate readings, allowing operating...

  • Bulk Bag Discharger

    This bulk bag discharger for loss-in-weight pneumatic conveying provides a clean and efficient way to discharge the entire contents of a bulk bag and is specifically designed for semi- to non-free flowing powders. This discharger uses proprietary pneumatically operated massage paddles, operator...

  • Electronic Air Pressure Valve Packer

    The Model A1000 electronic air pressure packer utilizes a load cell and a user-friendly Model IDS440HS digital weigh indicator/controller for bagging fine, medium, and course dry materials. This model offers production rates of 4 to 8+ bags per minute with weight accuracy of +/-3 to 5 oz, at...

  • Open-Mouth Bagger

    The PTH-900 Series open-mouth bagger is a modular approach, from semi-automatic to fully automatic with basically the same footprint. It is designed to bag powdery and granular products into gusseted and pillow-type bags. It can handle paper, plastic, and laminated poly woven bags at up to 20 bags...

  • Automatic Bagging Machines

    The 3CM-5 series automatic bagging machines are specifically designed for tight spaces. The baggers place an empty bag on the spout, fill it (typically 20-50 lb), and close the bag top (heat seal or sewing), all within the confines of the bagger. This system maintains bag-top control through this...

Pages