Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • High-Capacity Roller Mill

    The Raymond 120-in. roller mill system is designed to dry, pulverize, classify, and deliver various types of materials with feed sizes ranging from 10–70mm. This larger mill complements Alstom’s existing product line to address the growing need for limestone sorbent and solid fuel...

  • Dust Suppression for Low-Turbulence Applications and Fine Particle Control

    This new low-turbulence design is used for applications in which a fan-driven mist would be undesirable. Developed in response to customer input, the DustBoss DB-M is well suited to operating conditions involving very fine dust particles, including slag dust or fly ash. The unit generates an...

  • Combination Filling System

    This combination filling system unites a Spee-Dee Servo 3600 auger filler with two volumetric cup fillers. The three-filler equipment configuration integrates two particulates and a powder within a single pouch at rates of up to 120 units per minute. A continuous motion vertical form/fill/seal unit...

  • Reciprocating Drawer Magnets

    To eliminate the trade-off between effective magnet coverage and potential product “choking,” MPI developed the Reciprocating Drawer Magnet (RDM). The RDM features reciprocating tube magnets that act as knives to break up the product as it flows through the tubes, allowing it to travel...

  • The Benefits of Twin-Shaft Mixing

    Everyone has a general idea what mixing means, but describing the mixing process is not so simple. The objective of any mixing process is to distribute and blend the materials with different characteristics, different quantities as evenly as possible resulting in a homogenous mixture. Introducing...

  • Sanitary Bulk Bag Filler

    The Swing-Down bulk bag filler features all-stainless construction finished to sanitary standards, and a fill head that lowers and pivots, stopping in a vertically oriented position that places the bag inlet spout inflatable connection, inflator button, and four bag loop latches within reach of an...

  • Material Transfer Using Valves and Retractable Sleeves

    In continuous processing material transfer methods are typically fixed operations, with mechanical and pneumatic conveying covering most applications. However batch processing of powders presents its own unique challenges especially under those circumstances where containment is critical such as...

  • Drop Through and Blow Through Rotary Airlock Valves

    These rotary air lock valves are designed for sanitary pneumatic conveying systems operating within -15 in. Hg to +15 PSIG with 6- to 12-in.-capacity options. The standard nine-blade rotor positions two blades to always be in contact with the discharge side of the housing providing a superior seal...

  • Magnetic Separation Equipment

    Puritan manufactures a complete line of magnetic separation products for capturing, controlling, and removing ferrous tramp metal contaminants from products and processing systems. Magnetic separation products are available in standard sizes and strengths with effective designs to meet most...

  • Patent-Pending Seal

    With the EZ Seal, your Plattco double flap airlock valve will provide you with a bubble tight seal and prevent any air leakage. Unlike traditional rotary airlocks, the double flap valve with EZ seal technology provides a positive airlock seal, virtually eliminates excessive leakage and the cost of...

Pages