Powder & Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Safe Storage Tips for Combustible Materials

Storage_Safety_Tips_GERICKE.jpg Image courtesy of Gericke
Proper Explosion Venting Tops Slate of Important Storage Considerations

Several recent fires traced to combustible dust in storage and in process were safely contained while others caused serious injuries or fatalities. To help contain and minimize damage to personnel and equipment from such incidents and prevent them from arising, Rene Medina, executive vice president of process equipment manufacturer Gericke USA, Somerset, NJ (www.gerickegroup.com), offers three, key considerations for promoting safe storage.

Explosion Venting: Specify a certified explosion venting system that matches the conditions specific to the material, silo, elevator, vessel, or other powder storage unit. Explosion vents direct the pressure and flames from an industrial explosion to a planned pathway designed to safely avoid workers, while maintaining the integrity of the machinery or equipment. Once installed, be sure to use the storage unit as intended and in the event the material or other conditions change, verify the explosion vent remains suitable.

ATEX Certification: Check that the silo or other storage unit has earned the ATEX certification for providing a high level of protection in areas where an explosive atmosphere with a cloud of combustible dust is likely to occur or remain present continuously or for long periods of time during normal operation. But that isn't enough. Check that the controls, instrumentation, and other ancillary systems and components have also earned the ATEX certification.

Know Who's Responsible: Given the risk of a combustible dust explosion and complexity of explosion venting and deflagration systems, many processors rely on vendor manufacturers for proper system design. It is vital to understand that while vendor manufacturers may offer design guidance and recommendations, they are legally barred from specifying the system. Ultimately, the powder processor is responsible so work with a reliable vendor but be educated before purchasing.

For more information, contact Gericke USA Inc. at 855-888-0088, sales.us@gerickegroup.com, or www.gerickegroup.com

Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish