Powder & Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

2021 Powder Show Preview

Mass-Flow Reusable Polyethylene Hopper

Image courtesy of Remcon Plastics Reusable_Hopper_REMCON.jpg
The reusable polyethylene hopper is designed for use with fine particles and low bulk density powders.

Booth 1522 - This eco-friendly, heavy-duty, dry bulk mass-flow reusable polyethylene hopper is designed for use with fine particles and low bulk density powders.

The two-piece design features a 60° cone and a 45-cu-ft-capacity that can hold nominal weight of 5,000 lb.

Molded from FDA-approved virgin polyethylene the DBH-60/45 is sanitary for food and pharmaceutical applications, yet rugged enough for the most demanding industrial challenges. Design features allow for a variety of valves and discharge configurations.

Utilizing a patent-pending interlock system, the hopper and base can be lifted by crane as one piece or can be set up where a crane can easily lift the hopper out of the base for sanitary discharge or in areas with limited headroom.

Remcon Plastics, Reading, PA 800-360-3636 www.remcon.com

Hide comments
account-default-image

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish