Powder & Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Screen Classifying Cutter

Munson Machinery CompanyThe SCC-15 screen classifying cutter cuts hard, soft, and fibrous materials into controlled particle sizes from granules down to 20-30 mesh with minimal fines, at rates to 500 cu ft/hr. The patented helical rotor design with dozens of cutter heads attached to a helical array of staggered holders called "interconnected parallelograms" continuously shear oversize materials against twin, stationary bed knives. Carbide tipped cutter heads along the entire shaft, with no frontal gaps between the tips, cut the product into uniform pieces with minimum fines and imperfections in the granulate, with little to no heat generation. The cutter has a 15-in.-throat width and can be fitted with 30 parallelograms with 60 cutter inserts. Bed screen perforations range from 1/32 to 1 1/2 in. in diameter and up to 3 sq in.        
Munson Machinery Company, Inc., Utica, NY 800-944-6644 www.munsonmachinery.com