Powder & Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Drum Conditioner

Article-Drum Conditioner

Meto Systems drum conditioner
Meto Systems drum conditioner

Powder Show Booth 3127 - Manufactured from 304 stainless steel, this drum conditioner is fully pneumatic. It is equipped with a manual turntable to hold the drums, floor locks, two-handed controls for safe operation, and four abrasion-resistant polyurethane wheels for maneuverability. It is used in warehouse environments, GMP areas, hazardous locations, or any site with an air supply. The unit applies pressure through horizontal and vertical bars; drums are to be loaded with the internal liner still tied and the lid still attached. The pneumatic cylinders generate 1600 lb of clamping force spread evenly, yet through multiple points of contact over the drum surface. The turntable can hold plastic and fiber drums ranging from 12 to 36 in. high, and 12 to 24 in. in diam; cardboard boxes ranging from 12 to 24 in. in square base area, and 12 to 36 in. high; and multi-ply paper or plastic bags ranging from 12 to 36 in. high.

Meto Systems, Franklin Lakes, NJ 201-405-0311 www.metosystems.com

Click here for information about the upcoming International Powder & Bulk Solids Conference/Exhibition


TAGS: Storage
Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.