Endress+Hauser announces its April 2013 schedule of instrumentation training courses. Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions.

Flow School - Introductory
Monday, April 8, 2013 - Wednesday, April 10, 2013
TriNova Inc. Partnership Facility
4771 S. Mendenhall Rd, Memphis, TN

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~flow-instrumentation-training

The Endress+Hauser F-101 introductory course to flow will provide maintenance and engineering personnel with a basic understanding of numerous flow technologies, plus in-depth training on magnetic and Coriolis flow meters that apply to virtually any manufacturer's equipment. Following this introduction, it proceeds with in-depth training on magnetic and Coriolis flow meters. The class will be a combination of classroom and hands-on training on either the Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The 16-hour course covers:

* DP Transmitters/Primary DP devices
* Vortex Shedding Flow Meters
* Electromagnetic Flow Meters
* Coriolis Flow Meters
* Ultrasonic Flow Meters
* Thermal Dispersion Flow Meters
* Volumetric vs. Mass Flow
* Field Tooling

Flow School – Advanced
Wednesday, April 10, 2013 - Friday, April 12, 2013
TriNova, Inc. Partnership Facility
4771 S. Mendenhall Rd, Memphis, TN

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F102

The Endress+Hauser F-102 advanced course is designed for students having successfully completed the basic Flow School Course. Class will start by providing instrument techs and engineers with a brief section on the basic understanding of numerous flow technologies. Following this introduction, it proceeds with in-depth training on vortex shedding, electromagnetic, ultrasonic, and Coriolis flow meters, plus Density and Viscosity measurements. This class will primarily be hands-on training on either the Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The 16-hour course covers:

* Coriolis Flow Meters
* Ultrasonic Flow Meters
* Electromagnetic Flow Meters
* Density and Viscosity Measurements
* Vortex Shedding Flow Meters
* Endress+Hauser Field Care

Time of Flight (ToF) School
Wednesday, April 10, 2013
Endress+Hauser
Greenwood Sales Center
2350 Endress Place, Greenwood, IN

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L103

The Endress+Hauser L-102 time of flight (ToF) course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters, that apply to virtually any manufacturer's equipment. Following this introduction, it proceeds with in-depth training on ToF technologies that include a variety of radar types as well as ultrasonic level transmitters. The class will be a combination of classroom and hands-on training on either the Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The 16-hour course covers:

* Radar Transmitters
* Envelope Curve Evaluation
* Guided Radar Transmitters
* Ultrasonic Transmitters
* ToF Tooling
* ToF Applications

Flow School Coriolis
Wednesday, April 10, 2013 - Friday, April 12, 2013
TriNova Inc. Partnership Facility
4771 S. Mendenhall Rd, Memphis, TN

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103

The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements. The course (8 hours) will start by providing maintenance and engineering personnel with a basic understanding of the Coriolis principle. Following this introduction, it proceeds with in-depth training on density and concentration measurements. This class will be a combination of classroom and hands-on training on either the Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The course covers:

* Flow Overview
* Field Tooling
* Coriolis Basics
* Applications
* Entrained Air
* Density Measurements
* Zero Points

Pressure & Temperature School
Thursday, April 11, 2013
Endress+Hauser
Greenwood Sales Center
2350 Endress Place, Greenwood, IN

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/P101

The Endress+Hauser P-101 Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies that apply to virtually any manufacturer's equipment, as well as the skills needed to set up and maintain such equipment. The class will be a combination of classroom and "hands-on training” featuring either the Process Training Unit (PTU), a full-scale, working process operation with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The course covers:

* Pressure Transmitters
* Differential Pressure Transmitters - Flow
* Differential Pressure Transmitters - Level
* Diaphragm Seals
* Temperature Transmitters
* RTD/Thermocouple sensors
* Displays & Relays
* Communication Tools & Methods

Open Space & Guided Wave Radar Level School
Wednesday, April 17, 2013
TriNova Inc. Partnership Facility
4485 Laughlin Drive South, Mobile, AL

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~Radar-Level-Training

The Endress+Hauser L-104 Radar Level School is an introductory course (eight hours) on Open Space and Guided Wave Radar Level for maintenance and engineering personnel. The course dedicates a half day to each technology to give a basic understanding of these level technologies. The class will be a combination of classroom and hands-on training on either the PTU (Process Training Unit), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The course covers:

* Guided Radar
* High & Low Frequency Radar
* E+H FieldCare Software Tooling
8 PDH (Professional Development Hours) available upon completion of the entire course.

Pressure & Temperature School
Tuesday, April 23, 2013 - Wednesday, April 24, 2013
Carotek Inc. Partnership Facility
700 Sam Newell Rd, Matthews, NC

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/P101

The Endress+Hauser P-101 Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies that apply to virtually any manufacturer's equipment, as well as the skills needed to set up and maintain such equipment. The class will be a combination of classroom and "hands-on training” featuring either the Process Training Unit (PTU), a full-scale, working process operation with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The course covers:

* Pressure Transmitters
* Differential Pressure Transmitters - Flow
* Differential Pressure Transmitters - Level
* Diaphragm Seals
* Temperature Transmitters
* RTD/Thermocouple sensors
* Displays & Relays
* Communication Tools & Methods

Open Space & Guided Wave Radar Level School
Wednesday, April 24, 2013
TriNova Inc. Partnership Facility
37456 Highway 30, Gonzales, LA

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~Radar-Level-Training

The Endress+Hauser L-104 Radar Level School is an introductory course (eight hours) on Open Space and Guided Wave Radar Level for maintenance and engineering personnel. The course dedicates a half day to each technology to give a basic understanding of these level technologies. The class will be a combination of classroom and hands-on training on either the PTU (Process Training Unit), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The course covers:

* Guided Radar
* High & Low Frequency Radar
* E+H FieldCare Software Tooling
8 PDH (Professional Development Hours) available upon completion of the entire course.

Flow School – Advanced
Tuesday, April 30, 2013 - Thursday, May 2, 2013
Carotek Inc. Partnership Facility
700 Sam Newell Rd, Matthews, NC

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F102

The Endress+Hauser F-102 advanced course is designed for students having successfully completed the basic Flow School Course. Class will start by providing instrument techs and engineers with a brief section on the basic understanding of numerous flow technologies. Following this introduction, it proceeds with in-depth training on vortex shedding, electromagnetic, ultrasonic, and Coriolis flow meters, plus Density and Viscosity measurements. This class will primarily be hands-on training on either the Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The 16-hour course covers:

* Coriolis Flow Meters
* Ultrasonic Flow Meters
* Electromagnetic Flow Meters
* Density and Viscosity Measurements
* Vortex Shedding Flow Meters
* Endress+Hauser Field Care

Flow School Coriolis
Tuesday, April 30, 2013 - Thursday, May 2, 2013
Carotek, Inc. Partnership Facility
700 Sam Newell Rd, Matthews, NC

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103

The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements. The course (8 hours) will start by providing maintenance and engineering personnel with a basic understanding of the Coriolis principle. Following this introduction, it proceeds with in-depth training on density and concentration measurements. This class will be a combination of classroom and hands-on training on either the Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands designed to simulate operating conditions. The course covers:

* Flow Overview
* Field Tooling
* Coriolis Basics
* Applications
* Entrained Air
* Density Measurements
* Zero Points

For more news, equipment reviews, and articles, visit our Instrumentation & Control Equipment Zone