CSB Gives Investigation Update Honeywell Toxic Chemical Release
The 2023 incident occurred after a reboiler at the facility exploded.
The US Chemical Safety and Hazard Investigation Board (CSB) released an update into a toxic chemical release on January 23, 2023, at the Honeywell Performance Materials and Technologies facility in Geismar, LA.
A reboiler at the facility exploded, leading to the release of over 870 lb of hydrogen fluoride (HF) gas and nearly 1,700 lb of chlorine gas, both highly toxic substances. Nearby highways were closed, and workers at the facility sheltered in place. Honeywell estimates the property damage to be approximately $4 million.
The CSB’s update states that the most recent mechanical integrity inspections of the reboiler prior to the explosion were in September 2020 (in which Honeywell used ultrasonic thickness testing) and in October 2021 (in which Honeywell conducted an internal visual inspection of the reboiler). Based on the September 2020 inspection, Honeywell had estimated 1.1 years of remaining service life for the reboiler shell.
After the October 2021 visual inspection, Honeywell personnel recommended that the shell be replaced at the next shutdown opportunity, and in January 2022, Honeywell initiated a project to purchase a replacement reboiler shell. Management approved the project but did not purchase or install a replacement shell before the reboiler ruptured on January 23, 2023.
A Boiling Liquid Expanding Vapor Explosion (BLEVE) occurred due to the conditions inside the reboiler at the time of failure. This resulted in the sudden release of the HF, chlorine gas, and other substances from the reboiler, distillation column, and other ancillary equipment.
The CSB is continuing to gather facts and analyze several key areas, including: The CSB’s board members are appointed by the president subject to senate confirmation. The Board does not issue citations or fines but makes safety recommendations to companies, industry organizations, labor groups, and regulatory agencies such as OSHA and EPA.
Honeywell’s mechanical integrity policies and practices
Honeywell's project management policies and practices
Relevant facility, corporate, and industry standards
About the Author
You May Also Like