Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Dust Collection & Air Pollution Control

  • Closed-Cycle Dust Recovery System

    April 29, 2013

    The NBE E3 bag spout interface protects operators and facilities from exposure to airborne material dusts that can often escape during bulk bag spouting and material discharge. The NBE E3 closed-cycle dust recovery system secures and encloses the bag spout within a sealed containment cylinder. The...

  • Flexible Thermoplastic Urethane Hose

    April 29, 2013

    Static dissipative U30-SDC is for those who want to minimize the static build up from the friction caused by the material traveling through the hose. It is a flexible thermoplastic urethane hose that is ideal for highly abrasive applications such as pellets or dust collection. It is recommended for...

  • Modu-Kleen Downdraft Series Dust Collector

    April 29, 2013

    The Modu-Kleen downdraft dust collector contains fugitive dust. The air enters at the top of the dust collector housing and flows downward to the cartridge filters, improving the filtering process and the material-to-air ratio. Air velocities are lower than those with a conventional dust collector...

  • Graphical Computer Modeling Software

    April 25, 2013

    GCM is a graphical computer modeling software developed by JOA to simulate, optimize, design, and balance dust and vapor collection systems. The model operates on an iteractive basis, resulting in precision system balancing with optimal air flows and transport velocities system-wide, which...

  • Flameless Venting – The “New” Technology for Safe Indoor Explosion Venting

    April 23, 2013

    The history of catastrophic industrial explosions is a long and truly horrible one. In 1921, a silo containing 4500 tons of ammonium sulphate and ammonium nitrate exploded at BASF in Germany, killing 561 workers. The explosion was so massive it was felt 300 miles away and left a crater more than 70...

  • Explosion-Proof Vacuums

    April 22, 2013

    Like the FRV Series, the DS2-EX Series is legally certified to Class I, Division 1 & 2, Group D and Class II, Division 1 & 2, Groups F & G requirements for use in hazardous locations, and is ETL third-party certified to UL and CSA standards. It reaches full compliance with OSHA and NFPA...

  • New Brochure Calculates Dust Collector Filter Cost of Ownership

    April 19, 2013

    Camfil Air Pollution Control (APC) has published a new brochure that describes how to calculate “Total Cost of Ownership (TCO)” for cartridge dust collector filters. Manufacturing professionals can use the methodology in the brochure to select filters that will save money while...

  • Dust Collector with Product Contact

    April 18, 2013

    The PPS product contact dust collector is designed with a 304 stainless steel body intended for use in the food and dairy industry. Top- and bottom-load designs are available, with this specific design highlighting the bottom-load design for either high-efficiency filter bags or filter cartridges....

  • Contaminant Extractor Arms

    April 17, 2013

    The E-Z Arm high-flow series of contaminant extractor arms provides efficient, source-point collection and removal of dusts, powders, fumes, smoke, odors, and other contaminants, before they can migrate throughout the facility to disrupt worker breathing zones, cause damage to sensitive equipment,...

  • Circular Tank Dust Collectors

    April 16, 2013

    Especially effective for dust problems in drying, grinding and conveying systems, CT Series dust collectors are designed to operate in process systems environments with minimum maintenance. Basic CT units are designed for two levels of pressure capability of 40 to 100 in. W.G. or 17 in. Hg (...