Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Drying & Thermal Solids Processing

  • Caloris Engineering Acquires Seitz Stainless

    April 2, 2019

    Caloris Engineering LLC, a provider of membrane, evaporation, and drying technology headquartered in Easton, MD, has acquired equipment fabricator Seitz Stainless of Avon, MN, to be operated as a wholly owned subsidiary. The acquisition adds in-house manufacturing to Caloris' suite of...

    comment
  • Vibrating Fluid Bed

    March 18, 2019

    Carrier has developed a vibrating fluid bed for a drying process that required five distinct processing zones, four for drying product and one for cooling it.  Each zone can be individually adjusted for airflow through the use of air balancing dampers, and independently controlled dual...

    comment
  • Turbo-Dryer Thermal Processor

    March 6, 2019

    The Turbo-Dryer is used to dry water and solvent wet materials capable of producing a free-flowing product with low moisture or solvent levels. Vacuum is not required. It gently handles material and dries with a minimum of breakage or fines formation. The dryer offers the benefits of low...

    comment
  • CresTechnologies Develops Seal for Airswept Dryers

    February 27, 2019

    CresTechnologies has developed a new seal for airswept dryers like rotary dryers, rotary calciners, and rotary kilns. The problem with many of the seals that are used today is that they are not flexible enough to close the gap around the rotary shell during its complete rotation. This is...

    comment
  • Flowrox, Inc.

    comment
  • Amandus Kahl USA Corporation

    comment
  • Bühler Appoints New CFO

    February 6, 2019

    Buhler announces that Andreas Herzog, 61, who has held the CFO position for 17 years, will retire effective September 1, 2019. His successor is Mark Macus, 47, who was employed at Bühler for five years and who currently serves as CFO of the Vitra Group. Herzog has made a substantial...

    comment
  • SPPS Introduces First 100-hp Single-Phase Electric Motor

    January 30, 2019

    Single Phase Power Solutions (SPPS) introduces the world’s first 100-hp single-phase electric motor.  The Belle Single-Phase Motor uses Written-Pole technology to deliver a 100-hp single-phase motor that is compatible with readily-available single-phase utility services. The utility-...

    comment
  • Mixing/Batch Vacuum Drying Crystalline Salt

    January 28, 2019

    Located in Cavezzo, Italy, MIX has been manufacturing mixing systems and industrial components for bulk solids handling, dealing with powders, granules, fibers and pastes since 1990. The MIX range of mixing equipment includes mixers, reactors, dryers, humidifiers, heaters, coolers, sterilizers,...

    comment
  • New Hybridized Drying System Introduced

    January 22, 2019

    RFC has combined the attributes of both hot-air impingement together with radio frequency drying for a new hybridized system available across a broad range of sizes and output capacities.  The new Macrowave Express series increases drying efficiency and line productivity, at the same time...

    comment

Pages