Powder & Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Dryer Discharge System

Article-Dryer Discharge System

Anhydro brand Spin Flash dryer
Anhydro brand Spin Flash dryer

Powder Show Booth 2230 - The Anhydro brand Spin Flash dryer can continuously dry cohesive and non-cohesive pastes, filter cakes, and certain high-viscosity liquids to a powder in a single step. Its blades, however, are designed for mixing and dispersing, not chopping. Often, feeds come in with a limited percentage of larger solids pieces, such as pebbles, which cannot be conveyed. Other feeds with fibers--such as okara or algae--tend to create “balls” due to the high-rotational mixing in the dryer. The accumulation of such lumps in the dryer has historically required frequent shutdown to remove them. To address this issue, SPX Flow has developed a patented discharge system for the dryer to remove most lumps and balls before they cause a shutdown. Automatic removal of these lumps should extend running time, save hours spent on cleaning, and increase dryer uptime to enhance productivity.

SPX Flow Inc., Getzville, NY 800-252-5200 www.spxflow.com

Click here for information about the upcoming International Powder & Bulk Solids Conference/Exhibition


Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.