Powder/Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

W.E.A.R. Valve Introduced for Abrasive Material

March 20, 2017
The Meyer W.E.A.R. valve
The Meyer W.E.A.R. valve

The Meyer W.E.A.R. (Wear Elimination & Abrasion Reduction) valve is designed and engineered for applications where abrasive material build-up is an issue. The valve internals are coated with a variety of wear-resistant coatings specifically matched for the materials conveyed. Housing coating options include heavy chrome, diamond chrome, ceramic, and chrome carbide, along with all white iron cast designs.

The rotor is a closed-end type and typically hard faced on all tip contact areas with Stellite and precision ground. The shaft-packing area is purged through a lantern ring design for optimal life. The design injects clean air between the headplate and the closed end rotor. Conveying air is diverted to each headplate cavity via an engineered orifice place. The air is then reintroduced with the material back into the conveying system.

WM. W. Meyer & Sons Inc., Libertyville, IL 847-918-0111 www.meyerindustrial.com

Click here for information about the PBS Toronto event, May 16-18, 2017

For related articles, news, and equipment reviews, visit our Valves, Gates, & Airlocks Equipment Zone

Click here for a List of Valve, Gate, & Airlock Manufacturers

Meyer, Wm. W. & Sons Inc.