Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

New Fluid Bed Drying System Recycles Nitrogen

December 17, 2018
Witte fluid bed drying system
Witte fluid bed drying system

This fluid bed drying system enables processors to eliminate risk of explosion by recycling nitrogen as a safe, proven alternative to traditional explosion suppression systems.

Increasing the amount of nitrogen in the process air to 85 percent to render combustion impossible, the Witte drying system features an integral baghouse dust collector set directly above the fluid bed drying zone to create a sealed system. Condensing the moisture removed with a chilled water coil, this approach allows 100 percent of the nitrogen to be recycled while safely containing 100 percent of the fine powders entrained in the airstream and separating them from the process gas. Recycling 100 percent of the nitrogen also reduces the amount of gas needed versus exhausting the moisture-laden gas and reduces its costs accordingly.

Developed to promote worker safety and aid compliance with NFPA 654 Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids, the Witte nitrogen recycling system is ideal for drying bentonite clay, pesticides and herbicides, powdered plastic resin, and other chemical, food, and pharmaceutical products that generate combustible particulates less than 200 µm. The Witte integral baghouse design allows these fine particles to be dried in a fluidized bed processor, which would not be possible in a conventional fluid bed dryer.

The Witte Company, Inc., Washington, NJ 908-689-6500 www.witte.com

For related articles, news, and equipment reviews, visit our Drying & Thermal Solids Processing Equipment Zone

Click here for a List of Drying & Thermal Solids Processing Equipment Manufacturers

 

Witte Company, Inc.