Powder/Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

IMI Unveils Round Drawer-in-Housing Magnet

September 3, 2019
Industrial Magnetics Inc. round-shaped drawer-in-housing
Industrial Magnetics Inc. round-shaped drawer-in-housing

Industrial Magnetics Inc. (IMI) has added a round-shaped drawer-in-housing for the separation of ferrous metal contaminants in dry, free-flowing powder and granular processing applications.

The round drawer-in-housing series is ideal for retrofit situations in gravity-fed systems where vertical space is limited. It eliminates the need for the “round-to-square” transitions that would be necessary on the inlet and outlet of square-drawer models, thereby reducing the overall vertical space needed for installation.

The product features two rows of magnetic tubes with 52 grade rare earth, Opti-B balanced circuits - a high-performance blend of 9500 gauss and 16.7 lb of pull strength on a ½-in. ball.

The two rows of tubes are aligned on alternating centers, forcing the product to flow in a zigzag pattern over the magnetic tubes. This cascade effect ensures maximum tramp metal separation, as the product has repeated contact with the magnetic tubes. For applications with height constraints, a low-profile model containing one row of magnetic tubes is also available.

Other features include an all-welded, food-grade, stainless-steel housing and a silicone gasket with T-handle clamps for positive sealing. Sidewall diverters increase product contact with magnetic surfaces, and a drawer guard prevents product from shelving.

The round housing is offered in standard inlet/outlet sizes of 4-, 5-, 6-, and 8-diam. Available options include: inlet and/or outlet flanges, tubes located on 3-in. centers for difficult flowing products, wear-resistant coating for abrasive products, and sanitary construction to meet USDA, HACCP, or other regulatory requirements.

Industrial Magnetics Inc., Boyne City, MI 888-582-0821 www.magnetics.com

More articles that may interest you:

The Evolution of Magnetic Separation Devices


How to Avoid Metal Contamination in Ready Meal Production

Magnets and the Acronym Soup of Process Facility Specifications

Testing Times for Bulk Food Metal Detector Checks

Guide to Handling a Metal Contamination Food Recall

Industrial Magnetics Inc.