Powder/Bulk Solids is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Dense Phase Pressure Vessel

August 6, 2019
Coperion K-Tron pressure vessel
Coperion K-Tron pressure vessel

The Coperion K-Tron pressure vessel is used in dense phase pneumatic conveying applications and suitable for premixed materials, materials with high bulk density and products that are highly abrasive, friable, or tend to segregate. The design of the dense phase pressure vessel is available in stainless steel construction. They employ high air pressure — above 15 psig — and low air volume as the motive force to convey powder or granular bulk solid materials through a pipeline at low velocity. It is also designed for high-capacity conveying rates and long distances in purged (clear line) and non-purged (full-line) systems. There are no moving parts besides the inlet and vent valves, so less wear occurs. Pressure vessel units come completely assembled to reduce installation cost, requiring only compressed air source and electrical power.

Coperion K-Tron Salina Inc., Salina, KS 785-825-3830 www.coperion.com

Here are more articles that may interest you:

 
 

 

Coperion K-Tron