Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Endress+Hauser Announces November-December Training Schools

August 23, 2013

Endress+Hauser announces its November-December 2013 schedule of instrumentation training courses. Classes typically are a combination of classroom and hands-on training on either the Endress+Hauser Process Training Unit (PTU), a full-scale, working process skid with on-line instrumentation and controls, or live instruments in training stands, both designed to simulate operating conditions.

www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-instrumentation-training

Courses include:

Level School – Introductory
Monday, November 4, 2013 - Wednesday, November 6, 2013 in Mobile, AL
The Endress+Hauser L-101 introductory course for level provides maintenance and engineering personnel with a basic understanding of level technologies that apply to virtually any manufacturer's equipment. It includes in-depth training on Time of Flight (ToF) technologies that include a variety of radar types as well as ultrasonic level transmitters.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L101

Certified PROFIBUS PA Engineer Training
Monday, November 4, 2013 - Friday, November 8, 2013 in Gonzales, LA
The Endress+Hauser C-201 Certified PROFIBUS PA Engineer Training is an intensive hands-on and theoretical 4-day, 24-hour training program. Upon successful passing of the final examination the participant will receive a certificate and the right to bear the title "Certified PROFIBUS PA Engineer." All successful participants will be listed on the official PROFIBUS homepage.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/C201

Basic Instrumentation School
November 5, 2013 - November 7, 2013 in Matthews, NC
The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic

Flow School Coriolis
Tuesday, November 5, 2013 in La Porte, TX
The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103

Time of Flight (ToF) School
Wednesday, November 6, 2013 in La Porte, TX
The Endress+Hauser L-102 time of flight (ToF) course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters, that apply to virtually any manufacturer's equipment.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L103

Level School - Advanced
Wednesday, November 6, 2013 - Friday, November 8, 2013 in Mobile, AL
The Endress+Hauser L-102 advanced course is for students having completed the basic level school. The Advanced Level School begins with a brief review of current level technologies. Following the technology refresher, the course looks deeper at each level measuring technology including proper techniques of configuration, calibration and troubleshooting.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L102

Pressure & Temperature School
Thursday, November 7, 2013 in La Porte, TX
The Endress+Hauser P-101 Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies that apply to virtually any manufacturer's equipment, as well as the skills needed to set up and maintain such equipment.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/P101

Basic Instrumentation School
November 11, 2013 - November 15, 2013 in Memphis, TN
The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic

pH & Conductivity Measurement School
Tuesday, November 12, 2013 in Greenwood, IN
The Endress+Hauser A-101 pH & Conductivity measurement school provides maintenance and engineering personnel with a basic understanding of pH and conductivity analytical technologies that apply to virtually any manufacturer's equipment. Following the introduction, it proceeds with in-depth training on pH and conductivity.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-instrument-training-ph

Liquid Analytical Measurement School
Tuesday, November 12, 2013 - Wednesday, November 13, 2013 in Greenwood, IN
The Endress+Hauser A-102 Liquid Analytical Measurement School provides maintenance and engineering personnel with a basic understanding of numerous analytical technologies, including pH, conductivity and chlorine monitors that apply to virtually any manufacturer's equipment.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/A102

Liquid Analytical Measurement School
Monday, November 18, 2013 - Wednesday, November 20, 2013 in Gonzales, LA
The Endress+Hauser A-102 Liquid Analytical Measurement School provides maintenance and engineering personnel with a basic understanding of numerous analytical technologies, including pH, conductivity and chlorine monitors that apply to virtually any manufacturer's equipment.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/A102

Flow School – Advanced
Tuesday, November 19, 2013 - Thursday, November 21, 2013 in Matthews, NC
The Endress+Hauser F-102 advanced course on flow measurement is designed for students who have successfully completed the basic Flow School Course. The class will start by providing instrument techs and engineers with a brief section on the basic understanding of numerous flow technologies. Following this introduction, it proceeds with in-depth training on vortex shedding, electromagnetic, ultrasonic, and Coriolis flow meters, plus Density and Viscosity measurements.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F102

Flow School Coriolis
Tuesday, November 19, 2013 in Chalfont, PA
The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103

Time of Flight (ToF) School
Wednesday, November 20, 2013 in Chalfont, PA
The Endress+Hauser L-102 time of flight (ToF) course for level provides maintenance and engineering personnel with a basic understanding of numerous ToF technologies, including radar and ultrasonic level transmitters, that apply to virtually any manufacturer's equipment.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/L103

Pressure & Temperature School
Thursday, November 21, 2013 in Chalfont, PA
The Endress+Hauser P-101 Pressure & Temperature School provides maintenance and engineering personnel with a basic understanding of numerous pressure and temperature technologies that apply to virtually any manufacturer's equipment, as well as the skills needed to set up and maintain such equipment.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/P101

Flow School Coriolis
Tuesday, December 3, 2013 in Matthews, NC
The Endress+Hauser F-103 Coriolis flow course provides maintenance and engineering personnel a basic understanding of the Coriolis principle for any manufacturer's equipment. It also provides in-depth training on density and concentration measurements.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/F103

Basic Instrumentation School
December 9, 2013 - December 13, 2013 in Mobile, AL
The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic

Basic Instrumentation School
December 10, 2013 - December 12, 2013 in Chalfont, PA
The Endress+Hauser I-101 introductory course to instrumentation provides maintenance and engineering personnel with a basic understanding of wiring, signals, instrumentation technologies, applications and installations that are applicable to virtually any manufacturer's equipment. Typical troubleshooting procedures for instrumentation will be covered and practiced.
www.us.endress.com/eh/sc/america/us/en/home.nsf/#page/~process-control-training-basic

For related news, articles, and equipment reviews, visit our Instrumentation & Control Equipment Zone

Endress+Hauser Inc.