Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Redesigned Lab Mill Has Larger Grinding Jars

    This redesigned lab mill with new larger grinding jars is designed for low-cost small production capabilities. Six jars can run simultaneously. All-polyurethane or solvent-resistant jars with leak-tight covers are available with 0.45- and 1.32-l slurry capacities. The round bottom grinding jars...

  • Flexible Screw Conveyors Used As Feeders

    Spiroflow flexible screw conveyors (FSCs), often used as feeders, provide a dust-free, low-energy, low-maintenance, and low-cost feeding solution. Accuracies of 3-5% are typical when using a flexible screw conveyor as a volumetric feeder, depending on the size of the screw conveyor and the product...

  • Sub-Fractional AC Gearmotors and Reducers

    Brother Gearmotors introduces a line of ie3 gearmotors that offers increased efficiency over standard IE1 models throughout the speed range and initiate less mechanical stress, which directly translates into long-term energy savings. The ie3 gearmotors run cooler and with less noise and, as they...

  • New Dust-Free Bulk Bag Dischargers

    These bulk bag dischargers provide dust-free product discharge and are expandable and flexible to meet discharging and bulk bag requirements. They are available in three models: Model MTD-2.5K for unloading large bulk bags up to 2500-lb capacity; Model MTD-4K for large bulk bags up to 4000-lb...

  • Explosion Protection for High-Temperature Applications

    For safety critical applications handling hazardous materials explosion panels are commonly installed to protect against potentially damaging explosions. For many applications it is critical to the functioning of the vessel and performance of the product that the internal temperature is maintained...

  • Precise Control Sanitary Jet Mill

    Sturtevant’s sanitary Micronizer is listed by the USDA for the production of active pharmaceutical ingredients and biological products. The unit’s open design allows complete access to the internal material grinding chamber and compressed air chamber for easy cleaning, product...

  • Interlocking Bucket Conveyors

    TipTrak bucket conveyors are designed to operate with maximum availability and minimal downtime. TipTrak has a wide variety of sizes available, from 250 ml to twin 5L, are available in three construction types (enclosed to varying degrees), and in both stainless and carbon steel. Each unit...

  • Vibratory Feeders for Heavy Materials

    Eriez C and A Series feeders are ideally suited for heavy material applications requiring feeders to operate under heavy loads. These light- and medium-duty units feed and control material flows at rates ranging from a few pounds to many tons per hour with stability, control, and accuracy. They...

  • Fluid Bed Agglomerator

    Kason's Vibro-Bed fluid bed agglomerator employs a spraying system that introduces moisture to powdered material as it is fluidized and dried, forming agglomerates on a controlled basis.      Equipped with imbalanced weight gyratory motors and mounted on a spring suspension,...

  • New Range of Compressed Air Dryers Released

    SPX has announced the release of a new value range of non-cycling, refrigerated compressed air dryers. The dryers offer a balance between technology and simplicity to dry compressed air systems to ISO 8573-1 Air Quality Class 4 to 5 pressure dew points. The HPR & HPRN Series of...

Pages