Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • OSHA and Combustible Dust: Standards and Solutions

    The risks of combustible dust are not new. But the dangers are still very real. Truth be told, the dangers can be dramatically reduced, if not virtually eliminated. However, there is a knowledge gap – either because of a lack of concern or a lot of confusion.      I hope to...

  • Silo Inspections Save Lives, Money, Time

    Periodic preventative inspections can identify areas of potential concern in concrete silos before safety issues such as concrete fall, wall failure, and complete silo collapse can occur. According to Dennis Blauser, CEO, Marietta Silos, all concrete storage silos should be inspected every...

  • Gentle Touch Mixers for Metallurgical Industry

    The Küttner Group builds turnkey plants for the metal producing and metal treating industry. Processing, melting, and conveying units are typically part of its scope of supply. For mixing alloy pellets required in a downstream reactor, Küttner was looking for a suitable mixer which would...

  • Rugged Zero Speed Control

    The model CMS (Compact Motion Switch) is a rugged loss-of-motion device for use on most rotating equipment, including overland conveyors, rotary valves, fans, crushers, delumpers, blenders, packaging equipment, and other machinery. The CMS is available in a weatherproof or explosion-proof cast...

  • Discharging Dry Goods as a Solid Column

    The Dust Suppression Hopper (DSH) concentrates the discharge of dry goods as a solid column into any target repository including trucks, rail cars, ships, storage containers, or stockpiles. The system is sized based on an application’s load out rate and bulk density, and then simply installed...

  • Fitting Replaces Couplings That Use Hose Clamps

    The BFM fitting is a flexible sleeve for connecting offset, vibrating, and oscillating equipment that you can quickly remove and replace without tools. The snap-in design eliminates pinch points, gaps, and crevices that allow powders to leak and get trapped. BFM fittings also provide stronger...

  • Gas Pycnometers

    The AccuPyc II 1340 Series gas pycnometers are fast, fully automatic instruments that provide non-destructive, high-speed, high-precision, volume measurements and true density calculations on a wide variety of powder, solids, and slurries.   Most analyses are completed in less than 15...

  • Pulse-Jet Roof Access Bin Vent

    Schust Standard Products introduces the Liberator pulse-jet roof access bin vent (PVR) that brings pleated filter technology to container venting and dust recovery.   PVR provides additional filter surface area in a compact design for high-efficiency applications involving storage bins,...

  • Mobile Vacuum Conveying Systems

    Vac-U-Max mobile vacuum conveying systems convey up to up to 5000 lb/hr of powders and granular bulk materials. The complete system offers a rolling frame that lifts vacuum receivers to a height of at least 91 in. at the discharge point. Vacuum receivers include replaceable inlet assemblies,...

  • Acoustic 3D Level Scanner

    The Acoustic 3D level scanner is an advanced ultrasonic level and volume measurement system for dry solids and powders. Each of the three horn antennas transmits a different low-frequency pulse and records the time/distance of each echo and its direction. The digital signal processor then analyzes...

Pages