Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • The Benefits of Real-Time Dust Monitoring

    Approximately 14.8 million adults in the U.S. have been diagnosed with chronic obstructive pulmonary disease (COPD), with an estimated 12 million people likely to have the condition, but not yet diagnosed.1 Many of these cases could be linked to occupational exposure from dangerous airborne dusts,...

  • On-Line Moisture Analyzer

    NDC Technologies introduces the PrediktIR gauge for the on-line moisture measurement of bulk materials during processing. The PrediktIR gauge meets the true demands of bulk processors looking for a basic on-line moisture measurement solution that is stable and accurate. Based on NDC’s proven...

  • Selecting the Right Technology to Measure Level and Volume of Solids

    Measuring the level and volume of powders and bulk solids in a vessel can be considerably more challenging than determining the level of a liquid. While measuring liquid level presents many challenges, most present a uniform surface. Solids don’t behave as predictably, and this often causes...

  • High-Speed Turning Technology

    Columbia’s new patented Variable Position Turner (VPT) technology maximizes speed and flexibility for inline high-speed palletizing. With VPT technology, servos are used to dynamically position the center turners laterally on an in-line palletizer while the layer is being formed. VPT...

  • High-Speed Shrink Sleeve/Neck Banding System

    PDC International Corp. has re-introduced a shrink sleeve applicator/bander that operates at up to 400 cpm, and handles a broad range of applications, including bottled and jarred foods, pharmaceuticals, and products with irregular shapes or inconsistent sizes, such as candles and syringes. The...

  • Classifying Impact Mill

    The Sturtevant FCM is a classifying impact mill capable of narrow particle size distribution from 95% below 250 micron (95% passes through 60 mesh) to 90% below 10 micron (90% passes through 1250 mesh). It is a workhorse in particle size reduction applications due to its combination of impact...

  • Pin Mill Cleans Rapidly

    Munson’s 24-in.-diam pin mill grinds, sizes, de-agglomerates, and homogenizes friable or other materials into controlled particle sizes, from coarse to fine (400 mesh). Also known as a centrifugal impact mill, it is equipped with a stationary outer disc and a rotating inner disc, both of...

  • Upgraded Grinding System

    Compared to the traditional peg grinding system, several significant upgrades have been made with the Neos grinding system. A ceramic material with high wear resistance and maximum thermal conductivity is now standard for the inner liner of the grinding chamber. The agitator shaft was designed so,...

  • Direct-Drive Mill

    The newly designed PKA Velocity Series mill now has dual air inlets controlled by air damping valves to control the volume of air intake into each of the air inlets in the mill chamber. These double the amount of air intake into the mills cutting chamber. The mill also has dual material outlets,...

  • Vacuum Conveying of Dense Metal Powders

    Additive Manufacturing, aka 3D printing, is a rapidly growing business sector with new machines, models, developments, and more complex components being added on a daily basis. As the production rates increase, the need to be able to supply raw materials to the machine and to reclaim/reprocess...

Pages