Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Nanoparticle Analyzer

    The DelsaNano-series particle analyzer performs zeta potential and particle-size analysis on the same sample and is designed to deliver accurate size measurement on particles ranging from 0.6 nm to 7 µm. The unit is also designed to measure the zeta potential of concentrated material and...

  • Temperature Data Logger with Flexible Probe

    The OM-CP-HiTemp-150FP is a small, rugged, reusable temperature data logger that is designed for deployment in harsh environments. It comes standard with a flexible silicone rubber cable, penetration-style stainless-steel probe, and stainless-steel body. The logger features a programmable start...

  • Extrusion Control Software

    This extrusion control package can control the extruder speed so that its output has a predictable and repeatable mass flow. By accurately measuring material throughput, gravimetric extrusion control can compensate for material and process variations and provide more consistent end-product quality...

  • Guided-Wave-Radar Level Sensors

    Unlike other devices, Flexar guided-wave-radar level sensors, based on time domain reflectometry, measure the level of challenging powders because TDR is not affected by dust. The sensors are reliable, accurate, and easy to install and commission. A continuous series of radar pulses is emitted and...

  • Rotation Switch

    The rotation switch series is used for level sensing of low-density and potentially explosive powders. Each switch unit uses a rotating vane as a sensor to detect the level of a dust or powdered material. The vane is turned slowly by a brushless synchronous motor. As long as the level of the powder...

  • Mercury-Free Tilt Sensor

    The Ramsey mercury-free tilt sensor incorporates advanced probes and controls that are designed to provide enhanced stability, sensitivity, and performance. Developed to address environmental concerns and meet government regulations, these units are easy to install. They are available with various...

  • Guided-Wave-Radar Level Transmitter

    The Sitrans LG200 guided-wave-radar level transmitter is a two-wire, loop-powered HART level transmitter that can measure materials with a dielectric range of 1.4 and higher, temperatures up to 800°F, and pressures up to 6250 psig. The line of 15 models includes coaxial, single- and twin-rod,...

  • Weight Controller

    Only 3 in. deep, the HI 4050 general-purpose weight controller is easily configured to meet specific application needs. Available with ac or dc power and in panel, remote, or blind DIN rail mounting, the unit can be installed quickly with no special holes to cut. Available with rate-of-change...

  • Moisture Sensors

    This manufacturer of process and laboratory NIR moisture transmitters offers the 3000 series that is designed to measure powders, granules, and filter cake. Installed on spray dryers, rotary dryers, vacuum dryers, and conveyors, the sensors can be measured to within an accuracy of ±0.1% on...

  • Twin-Screw Feeder

    The Model TSF twin-screw feeder is designed for precise batching and weighing applications. The feeder’s dual-helix design combines fast, high-volume filling with accurate dribble flow at the end of the cycle. Its compact design is ideal when limited space prohibits multiple individual...

Pages