Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Weigh Belt Feeders

    The Model 970N is a variation of the Model 970 line of weigh belt feeders. The 970N utilizes the same high-accuracy weighing and control technology as the standard Model 970. The 970N is an open-construction (no enclosure) feeder designed using GMP guidelines. It can be washed down and heat...

  • Mass Flow Feeder

    The mass flow feeder is a controllable high-capacity gravity feeder for relatively coarse granular materials. It consists of a mass flow hopper with two movable sides. The discharge rate is controlled by synchronous rotation of the two movable sides. The flow rate is a function of the discharge...

  • Bag Kicker

    The Model 4217 bag kicker is an in-line belt conveyor designed to transfer sealed bags from an upright position to a horizontal bottom first position at a right angle to the closing line. The bag is then in a position to be properly presented to a flattening conveyor and palletizing station. For...

  • Vacuum Receivers

    Redesigned P-Series central receivers are designed to handle powders, poor flowing powders, and fragile materials, providing a custom solution for difficult conveying applications. The modularity of the P-Series has recently been enhanced with the introduction of extension modules to increase the...

  • Small, Smart Dust Collectors

    An extension of the company’s patented PowerCore technology, Torit PowerCore dust collectors are smaller and smarter than traditional baghouse technologies. Field tested with excellent results in major wood, grain, cement, and plastics manufacturing operations for more than a year, full-scale...

  • Moisture Sensors

    The Model IR 3000 moisture sensor has been developed for instant, non-contact analysis of powder and granular materials in harsh environments. The instrument offers accuracy, stability, and is insensitive to material variations such as particle size and material height. Using a new patented optical...

  • Rotary Airlock Feeders

    These rotary airlock feeders offer a broad range of sizes, features, and capabilities. They are available in standard-duty, heavy-duty, sanitary valve, and custom valve series to meet most application needs. The standard-duty series are used in low-pressure conveying and dust collection...

  • Quick-Clean Rotary Valve

    The QC Aerolock rotary valve is designed for contamination-sensitive applications where frequent disassembly and cleaning is required. It is also excellent for use with abrasive materials. Without disengaging the airlock from the system, it can be easily disassembled and cleaned by one person using...

  • Classifier

    The Alpha classifier was developed for the production of fine products from 150 down to 6 µm and is especially suited for dry powders—both mineral and chemical. Depending on the fineness required, this equipment can be fed by gravity from the top or in the main airstream from below, and...

  • Large Tube Housing

    This new product incorporates the purification standards of a Rare Earth magnetic circuit with the innovations of a drawer-housing design. The company has taken the magnetic circuit found in pneumatic inline magnets, or bullet magnets, and incorporated it into a housing. It is ideal for gravity-fed...

Pages