Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Baghouse Pressure Transmitters

    The Model DP 20T (differential) and SP 20T (static) pressure transmitters feature a non-clogging design for mounting on the dirty side of a fabric filter baghouse or cartridge-style dust collector. The 4-20mA transmitters are more reliable than typical “tube” style electronic and...

  • Replacement Filters

    The Standard Main filter is composed of polyester and retains 99.1% efficiency at 1.5 microns. Star-shaped pleats add surface area, lowering the air-to-cloth ratio, and increasing filtration efficiency. The PVC Membrane filter is ideal for fine powders, commonly found in powder-coating facilities....

  • Self-Dumping Hopper

    This self-dumping hopper simplifies the disposal of dust captured by cartridge-style dust collection systems. Easier to use than conventional barrels or collection drums, the hopper is offered in two capacities (1 and 2 cu yd) and is ideal for a full range of dry dusts, including those that must be...

  • Duct Gate

    The AutoAire cut-off gate automatically opens needed duct branches when a machine is turned on, while closing off inactive branches and machines. This fully utilizes the pick-up power of a collection system by applying as much vacuum as possible, only when and where needed, allowing a smaller fan...

  • Heavy-Duty Dust Collection Systems

    These large-volume dust collection systems can be engineered to any pressure and feature proven heavy-duty, high-stiffness construction to prevent housing failures and deliver long operating life. Automated pulse jet self-cleaning of filters maintains system pressure. Compressed air in 90-100 psi...

  • Dust Suppression Hopper

    The dust suppression hopper is a cost-saving solution for the transfer of fertilizers, stock foods, wheat, sand, gravel, and many other dry, granular goods. It is installed under a feed point where it can be suspended above the target and kept at operating level. At the point of loading, or...

  • Twin Centrifugal Screener

    The Centri-Sifter twin ultra-high capacity centrifugal screener matches the capacity of two individual high-capacity screeners within a smaller footprint, while cantilevered three-bearing shafts allow rapid sanitizing. Dry or moist bulk solid material is gravity-fed through a feed splitter to...

  • Slide Diverter Valve

    The three-position SDV features a sealing method that uses regulated compressed air applied to the sealing rings, which results in an air-tight seal between the inlet and outlet ports. Features include: minimal line deflection and full port flow for low pressure drop; pipe or tube sizes from 2...

  • Drum Separator

    The Model HFP drum is specifically designed to provide increased efficiency of separation by regulating material flow to the face of the drum. It also prevents material from plunging directly onto the drum shell, reducing the possibility of physical damage caused by impinging heavy material or...

  • Powder and Pellet Receivers

    The 2400 series powder and pellet receivers provide a high-capacity sequencing system designed to handle powder, pellet, regrind, and granular materials. Each receiver has a stainless steel check valve to allow multiple receivers to draw material from a common conveying line. Various models are...

Pages