Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Insertable, Collapsible Rotary Paddle

    This collapsible paddle is a new option for the company’s line of BMRX and MAXIMA+ rotary level indicators. The design simplifies installation and removal of the rotary by allowing the stainless steel paddle to be collapsed to fit through a standard 1 ¼-in. opening common to powder and...

  • Microwave Moisture Sensor System

    The robust sensing system is used to measure moisture to a penetration depth of 12 in. in powders and bulk solids. The degree of accuracy is 0.2% where a measurement volume of 15 liters is desired. The sensor can be flange mounted or gantry mounted with other configurations available for...

  • Powder Processing Mills

    This full line of powder processing mills features coarse to ultra-fine grinding. The Kek Kibbler pre-breaker is designed to accept lumps up to 150 mm in diameter and reduce them to 2-3 mm within a narrow particle-size distribution and with minimal fines. The Kek cone mill, ideal for intermediate...

  • Lump Breakers

    Two models of lump breakers are designed to reduce softer and abrasive products such as filter cakes, food stuffs, chemicals, fertilizers, and fly ash into sizes that can be further processed. Both models are available with motor and drive options, as well as various materials of construction (mild...

  • Air Classifying Mill

    The Mikro ACM-e has been specifically designed for the carbon black industry. The enhanced model offers improved product quality and is cleaner and nearly grit-free compared to other air classifier mills. The new model is energy efficient, exhibiting low pressure drop, thus requiring less power...

  • Classifier Mill

    This classifier mill offers the combination of two-stage closed-circuit grinding with inter-stage classification. It was developed to handle higher volume and very fine size reduction jobs, and it fine-grinds and classifies materials such as grain, sugar, spices, glazes, protein, gelatin, and cocoa...

  • High-Capacity Crusher

    The Delumper Twin-LP is a powerful, high-capacity crusher that can efficiently reduce lumps, chunks, and agglomerates without churning or over-grind. These precision crushers are provided with inlet openings from 28 to 50 in. long. The DC2840 Twin-LP features a one-piece stainless steel body with...

  • Screen Classifying Cutter

    The SCC-15 screen classifying cutter cuts hard, soft, and fibrous materials into controlled particle sizes from granules down to 20-30 mesh with minimal fines, at rates to 500 cu ft/hr. The patented helical rotor design with dozens of cutter heads attached to a helical array of staggered holders...

  • Limestone Grinding Attritor

    This custom CL-200 attritor is part of a complete system used to grind limestone for the purpose of flue gas desulphurization. The system includes the limestone storage silo, gravimetric feeder, CL-200 attritor, mill product tank, hydrocyclone feed pumps, and hydrocyclone. The attritor is powered...

  • Fabricated Hammer Mills

    A new line of fabricated hammer mills for crushing, grinding, and pulverizing includes type A, B, and BX hammer mill models and features a lighter weight than previous hammer mills that were all cast. The hammer mills operate with a rain of hammer or ring blows to shatter and disintegrate materials...

Pages