Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Jet Sieve

    The MLS 200 jet sieve is available for small volumes and test applications. It uses standard 8-in. sieves, prevents inaccurate results due to screen blinding, and dedusts statically bound fines. Used for all dry materials from 20 to 1000 microns, it is ideal for electrostatic materials and on...

  • Vibratory Separator

    The MX separator is a new generation separator with design features to increase safety, provide a stronger construction, and allow for a more sanitary process. The totally enclosed weight guard prevents “reach-in” injuries, complying with CE standards. Making use of the appropriate...

  • Gyratory Sifter

    This all-metal Model CS-1 gyratory sifter is capable of providing from 1 to 4 separations of any dry product from 1/4 in. down to 400 mesh. It has the ability to screen up to 50,000 lb/hr and its passive, gentle gyratory motion keeps the product in constant contact with the screen for maximum...

  • In-Line Sifter

    Designed with a high net screening area, the QA36 pneumatic in-line sifter is an ideal HACCP solution for operations with moderate to high production volumes. Manufactured with a high level of sanitation in mind, as well as ease of maintenance using lightweight components, and form-fitting, snap-on...

  • Gravity Separator

    The T-20 offers 20 sq ft of separation surface and superior separation performance in a compact, economical design. Simplified and rugged controls assure that machine settings will be trouble-free and drift-free. The material is fed onto a flat porous deck that is sloped in two directions. Low-...

  • Magnetic Separators

    The ProGrade series of magnetic separators features standard magnetic plates, grates, traps, and tubes. Designed for general industry assemblies, the ProGrade Ceramic series targets the removal of medium to large ferrous contamination. These products offer basic protection from tramp metals...

  • Gap-Free Classifier

    The Vibroscreen gap-free classifier offers non-metallic material contact surfaces and quick-cleaning features designed to eliminate contamination of ultra-pure products. The 60-in.-diam classifier is configured with three screening decks for removing oversize particles and de-dusting, while...

  • Dry Separation Screener

    The Apex dry separation screener is a high-efficiency solution in polishing and load-out applications. High capacity and durability increase uptime and yield, and an ergonomic deck design makes maintenance easy. The screener uses a long-stroke, low-frequency motion to achieve rapid stratification...

  • Editor's Choice

    Fine Grind Air Swept Mill The Micro-Max fine grind air swept mill is a versatile screenless mill capable of producing a wide range of particle sizes. Typical applications are diverse, ranging from adhesives and asphalt to wheat germ and zinc oxide. The slave plate saves wear on the inlet beater...

  • Introduction to Air Classification

    A.J. DeCenso Air classifiers are preferred over fine screening in one or both of the following situations: 1) the rate is too high for fine screening; 2) the cut point is too fine for screening. Take for example an application in which calcium carbonate must be separated at 75 microns. A common...

Pages