Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Inventory Management System Operator Interface

    The HMI2 is the latest generation in operator interface for the SiloPatrol SE cable-based “smart” sensor inventory management system. The optional HMI2 features two sensor networks that provide operator interface for up to 32 SiloPatrol level sensors. It also contains a universal AC...

  • Size Reduction Spotlight - January 2010

    High-Capacity, High-Speed Impact Grinding The M-Series fine grinder was developed for grinding dry, free-flowing material as fine as 200 mesh (75 µm) with tight distribution of particle size. It is best suited for heat-sensitive materials such as resins, sugar, and powder coatings....

  • Weighing Spotlight - January 2010

    Intrinsically Safe Weighing Terminal The IND560x intrinsically safe weighing terminal brings performance and versatility into hazardous areas. Designed for both process control and manual weighing operations, the IND560x is ideal for weighing in Division 1 or Zone 1/21 areas. It features analog...

  • Feeders Spotlight - January 2010

    Single-Drive Feeder The Tecweigh QC10 single-drive feeder couples a Flex-Feed polyurethane hopper with an opening in the bottom and the ability to agitate the hopper without driving the auger. When material needs to be changed, simply stop the feeder and place a reclaim container underneath....

  • Pneumatic Conveying Systems: Maintaining Product Integrity En Route to the Packaging Line

    It’s one thing to move materials during the production process, but when it’s a finished product on the packaging line, choosing the right material handling system is essential. Getting it wrong results in squandered production time when product loss occurs, and wasted raw materials...

  • Gain-in-Weight vs. Loss-in-Weight Batching Systems

    Scott Culshaw When determining whether a gain-in-weight or loss-in-weight system is best for your applications, the first step, I believe, is to recognize that this is a complex decision with roughly a dozen factors to consider—and each of these factors impact all the others. It is one of...

  • Pneumatic Conveying Focus - January 2010

    Tri-Lobe Blower Packages Kaeser’s complete line of vacuum systems includes the Com-paK Plus blower series. These positive-displacement, tri-lobe blower packages provide consistent, reliable vacuum with heavy-duty construction and low noise levels. They deliver flows to 3305 cfm and vacuum...

  • Technology Review

    Plug and Play Transmitter The F11 series temperature transmitter is factory calibrated and programmed for use right out of the box. All thermocouples and RTD types are available for the full sensor range or scaled to the requirements. It features simple loop-power with 4–20 mAmp outputs. FM...

  • Hopper Separators

    Offering a wide range of capacity and discharge options, CFM hopper separators can be combined with the CFM line of CV blower units to fulfill any central vacuum system need. They can be equipped with self-cleaning cartridge filtration for large or heavier particles. Each unit has three options for...

  • Cyclone Dust Collectors

    These cyclone dust collectors are available in three basic models to allow for the selection of the right sized cyclone for each application. The cyclones are custom engineered to meet specific applications. Standard features include: coned tops for rain run-off, fabricated from carbon steel,...

Pages