Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Hopkinsville Elevator Gets Double Shot from Texas Shaker Vibrating Screen

    Most people don’t think about clean corn when they pour a cocktail. But that is not the case at Hopkinsville Elevator in Hopkinsville, KY, who is thinking about clean corn 24 hours a day, 7 days a week. Hopkinsville provides one of the three ingredients used in the production of whiskey:...

  • Large-Capacity Loss-in Weight-Feeder

    The Model PF-LC-S is a large-capacity loss-in weight-feeder designed to assure accurate and uniform feeding of a wide range of materials, from free-flowing to very fine cohesive powders. The model accurately measures load regardless of load position, is immune to support structure deflections...

  • Pneumatic Weigh Filling System

    This pneumatic gain-in-weight filling system conveys and weighs free-flowing bulk solids, and discharges the material into bulk bags dust-free. The filter receiver of a Pneumati-Con vacuum dilute-phase pneumatic conveying system is mounted on load cells, enabling the controller to stop the flow of...

  • Ultrasonic Sieving in the Powder Coating Industry

    Over the past few decades, the powder coating industry has seen double-digit growth in the U.S. and Europe. Many new markets have emerged to take advantage of this high-performance film coating. With its superior toughness and chip resistance and the simple method for overspray recovery, powder...

  • High-Speed HI 4050CW Check-Weighing Bundle

    The new high-speed HI 4050CW check weighing bundle processes up to 250 high resolution weight measurements per minute. It is ideal for both static and dynamic check weighing, for new systems, or for retrofits into older systems. It was designed for engineers who want an open source, non black box...

  • Solids Level Detection Using High-Power Technology

    How many more technologies will emerge in the world market for measuring continuous level for solids? With all of the level technologies available, it is becoming difficult to make a wise selection of which one will provide the best results. Many factors are involved in deciding which technology is...

  • Oblong Opening Mesh

    Stainless steel woven wire mesh with precise opening is now available from Asada Mesh. The accuracy is less than ±10%, which is stricter than JIS8801-Test Sieves Spec. The data measured maximum and minimum values of openings at 100 points with 5 types of our stainless mesh, which shows the...

  • VF-2000 Series Volumetric Feeder

    The VF-2000 Series volumetric feeder is a heavy-duty belt system designed to feed FFS and open-mouth baggers with hard-to-handle applications. The VF-2000 is equipped with reliable product level detectors and a two-speed belt conveyor driven through a pneumatic clutch-brake. A motorized leveling...

  • In-Line Weigh Feeder Modules

    The Model 270 weigh feeder has been designed to accurately meter polyethylene and polypropylene granules and powders, in an "in-line" vertical configuration, at feed rates between 50 and 6200 cu ft/hr. With its compact design, small footprint, and minimal height requirements, the Model...

  • Sahara Batch Ovens Maintain Temperature Control and Uniformity

    Sahara batch ovens with roll-in carts maintain superior temperature control and uniformity for drying or curing. Designed for ease of use and reliable performance in the harshest environments, these ovens are the ideal solution for curing or drying small parts in the chemical, plastics, and...

Pages