Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • AC600 Series Chemical Workstations

    AC600 Series chemical workstations offer flexibility and mobility for today’s ever-changing laboratory environment. The AC600 Series of ductless chemical workstations are designed to provide a low-cost solution for protection of the operator and environment from toxic vapors, gases, fumes,...

  • Sanitary Dry Blender

    A recent factory authorization test featured Continental Products Corp’s 400-cu-ft sanitary dry blender, the Rollo-Mixer Mk VIII. Data from the 14,000-lb test batch of powdered drink flavor shows complete uniformity in 5 minutes, while 10- and 15-minute samples showed no variance. ...

  • LW-300 High-Speed Stretch Wrapper

    The new LW-300 rotary arm stretch wrapper is a fully automatic system designed to apply a mechanically pre-stretched film with tension to a pallet load. Its overhead rotary arm eliminates the need to rotate the load and allows for high-speed wrapping, reaching up to 95 loads per hour. Depending on...

  • PulsaJet Spray Nozzle for Hazardous Locations

    This electrically-actuated hydraulic PulsaJet nozzle is FM-approved for spraying alcohol- and solvent-based fluids in Zone 1 rated hazardous locations. The nozzle, which complies with EU safety directives (ATEX and CE), as well as National Electrical Code 505, provides accurate spray placement and...

  • Cleanable Round Airlock

    The cleanable round airlock (CRA) can handle extremely high process rates on products. Now, high-end food and pet food manufacturers can use cleanable technology in systems where high product volume demand may have prevented their use in the past. Tool-free valve operation makes it easier to clean...

  • Ploughshare Mixer Is Coating Solution for Crispies

    For processing "crispies", a Ploughshare mixer demonstrates that complex coating tasks can be implemented by comparatively cost-effective solutions with precise control of the process parameters. In practical terms this means coating extruded cereal products with chocolate and glaze. The...

  • Pneumatic Hazardous Location Vacuum for Combustible Dust

    The Nilfisk CFM A15/50EXP is designed for the collection of dry dust and debris that often accumulates on floors and overhead areas in manufacturing facilities. This combustible dust-safe pneumatic vacuum is powered by compressed air for use where electricity is undesirable or unavailable and meets...

  • ProRate Gravimetric Blender

    The ProRate gravimetric blender handles pellets, regrind, and raw materials. Consisting of one to eight feeders and a central microprocessor-based controller, the ProRate gravimetric blender is designed to continuously meter raw materials accurately into a central station hopper. Each of the...

  • Heavy-Duty Discharge Valve

    The Lorenz discharge valve is manufactured with heavy-duty 3/16-in. stainless blades with built in material scrapers that aid in minimizing material packing or building up. The square machined blade “dead ends” against the body of the valve allowing material to escape below. The valve...

  • Central-Vac System Eliminates Facility Debris, Residue

    This central-vac system eliminates facility debris or residue from spills and minimize the health and explosive risks associated with dust. A system can be installed for production line product retrieval, reusing what may have once been considered of no value. Design a multi-floor, multi-drop...

Pages