Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • Dust-Free Python Conveyor

    The Python Conveyor can be installed in both a vertical and horizontal position and can be routed around obstructions with radius of turn as small as 10 ft. It also has the advantage of being a dust-free system when transporting material by totally encasing the product. The Python tube inherits...

  • Fluid Bed Dryers

    When drying large volumes of material, energy consumption is a controllable expense. Ventilex fluid bed dryers maximize ROI by reducing energy expenditures. The energy cost per year to operate a large dryer is typically as much or more than the initial investment in the dryer. These dryers are...

  • Flash Drying Hazardous Materials

    In many continuous flash drying applications, the products being dried and solvents being evaporated are often non-toxic and do not present an explosion hazard. Therefore, system design is relatively straightforward and the environmental issues are of minor concern as water vapor and sometimes...

  • Material Effect on Power Requirements for Screw Feeders

    A screw feeder is commonly used to meter flow in powder processing applications because of ease of use, low maintenance, and material integrity without degradation. The relatively simplistic equipment design of the screw feeder can be misleading when selecting and specifying motor and auger sizes...

  • MDL650 Continuous-Duty Vacuum

    The MDL650 continuous-duty vacuum uses a continuous bagging system and eliminates drum handling, and provides the operator with better control over dust. The MDL650 comes equipped with a unique filter cleaning system that does not require compressed air, and the filters can be cleaned without...

  • Titan Series TLD Diverter

    The Titan Series TLD diverter is designed for use in gravity-flow applications where abrasive material is diverted from one source to either two or three destinations. Material handled with the TLD diverter can include aggregates, rock, glass cullet, sand, refractory mix, and clinker. It is...

  • Powered-Brush Conveyor Belt Cleaner

    This powered-brush cleaner for conveyor belt applications features a rotating design that removes material accumulation and dust in difficult applications. Well suited to belts that use raised elements (cleats, chevrons, ribs, or lugs) to assist in carrying material, the Martin brush cleaner is an...

  • Model FF4 Metal Separator

    Eriez offers the Model FF4 metal separator, the newest addition to its line of inspection equipment. Used to inspect dry bulk products under gravity free-fall conditions, the Model FF4 is used mainly in the plastics and food industries where high sensitivity is required. It detects all ferrous and...

  • Rotary Scalpel

    The Rotary Scalpel is a metering device that provides processors with a new level of batching and/or filling accuracy by combining a unique rotary drum design with a pneumatic scalpel. A fundamental design feature of the Rotary Scalpel is to functionally decouple the inlet design from the discharge...

  • Endecotts Test Sieves

    Endecotts test sieves are designed and manufactured to be extremely precise and accurate, while offering good handling, nesting, and strength. Each sieve is individually made under the most stringent quality control procedures using the finest materials. The wire cloth is checked at every stage of...

Pages