Utility Menu

Powder/Bulk Solids

The Source for Dry Processing and Bulk Handling Technology

Featured Equipment

  • In-Line Pneumatic Sifter/Screeners

    The QA (Quality Assurance) series of in-line pneumatic sifter/screeners was developed to answer the quality assurance and HACCP needs of food, pharmaceutical, and chemical operations. Manufactured with a higher level of sanitation in mind, the QA series has smooth surfaces with fewer weldments...

  • MCS-1600 Air Classifier

    The model MCS-1600 is designed for large-capacity cement, fly ash, lime, gypsum, and coal applications. The MCS-1600 was designed to accept a feed stream rated at 300 tn/hr of cement from ball mill discharge. The classified fine product is produced at 100 tn/hr at a fineness of 95% passing 45...

  • Slide Diverter Valve

    The three-position slide diverter valve features a sealing method that uses regulated compressed air, applied to the sealing rings. This results in an airtight seal between the inlet and outlet ports and allows the valve to can be used in either pressure or vacuum pneumatic conveying systems. This...

  • Slide Valves

    These valves consist of no more than three components: the body, the sliding blade, and the drive (hand wheel, electropneumatic actuator, or gear motor). Dismantling and assembly of the valve components is carried out in less than five minutes due to a specially designed incorporated inlet section...

  • Microwave Mixer Heating System

    Marion Mixers has partnered with AMTek Microwave to design and manufacture microwave vessel heating systems for the processing industries. This combination of a microwave and a mixer in one vessel solves a difficult microwave challenge: the ability to achieve uniform heat distribution. Other...

  • NX Industrial Vacuum Loader

    The redesigned Guzzler NX industrial vacuum loader features a more powerful blower. Rated at 88.9 dB per SAE Test J1372, the redesigned Guzzler NX is the quietest vacuum loader in its class. Built for clean-up and recovery of a wide range of materials, including solids, dry bulk powders, liquids,...

  • Powder Induction & Dispersion System

    Processors can now add dry ingredients to mix vessels in a more ergonomic fashion, reducing operator injuries. Admix offers a range of products for consistent powder delivery even as viscosity and solids levels increase, insuring that your system will never plug or foul. Deliver powder inline at...

  • Drop Through and Blow Through Rotary Airlock Valves

    These rotary air lock valves are designed for sanitary pneumatic conveying systems operating within -15 in. Hg to +15 PSIG with 6- to 12-in.-capacity options. The standard nine-blade rotor positions two blades to always be in contact with the discharge side of the housing providing a superior seal...

  • AC600 Series Chemical Workstations

    AC600 Series chemical workstations offer flexibility and mobility for today’s ever-changing laboratory environment. The AC600 Series of ductless chemical workstations are designed to provide a low-cost solution for protection of the operator and environment from toxic vapors, gases, fumes,...

  • Sanitary Dry Blender

    A recent factory authorization test featured Continental Products Corp’s 400-cu-ft sanitary dry blender, the Rollo-Mixer Mk VIII. Data from the 14,000-lb test batch of powdered drink flavor shows complete uniformity in 5 minutes, while 10- and 15-minute samples showed no variance. ...

Pages